Loading ...
Loading ...
Loading ...
10
en
Do not brew less than the minimum
amount of three cups since the coffee
will not have the desired strength and
temperature (1 cup = approx. 125 ml).
Never remove the carafe while the
machine is brewing coffee since this may
cause the filter holder to overflow.
Make sure that carafe’s lid is closed
when you place the carafe on the coffee
machine.
Do not use other carafes since the special
drip protector will block the coffee from
flowing into the receptacle.
Some water accumulation on the filter
holder is normal; it does not indicate that
the coffee machine is defective.
Before using
for the first time
Remove any stickers or film.
Pull enough of the power cable out of the
storage compartment and plug in.
Press ON/OFF switch O; the display
flashes.
Set the current time by pressing button h
for the hour and button min for the minute.
Note: You can change the time. Press
buttons h and min simultaneously and set
the correct time.
To clean, fill water tank with 6 cups of
water and replace it. Press the start
button; cleaning program starts.
Repeat the cleaning process.
Note: You may notice a “new machine”
smell; this is normal. If this is the case, fill
with a vinegar solution (1 cup of vinegar
for 5 cups of water) and run the cleaning
program. Next, rinse the machine twice with
6 cups of water.
Clean the carafe thoroughly.
Brewing coffee
Remove the water tank, fill it with water
and replace it.
Flip out the filter housing.
Insert a 1x4 paper filter in the filter holder
and add the desired amount of coffee.
Flip back the filter housing until it engages.
Place the carafe with the lid closed under
the filter housing.
Press button start to begin the brewing
process.
At the same time, the auto off function is
activated; the display lights up.
TKA863. only
Info: The appliance has an automatic
auto off (power save) function, which
switches the appliance to power-saving
mode around 40 minutes after the brewing
process is complete.
TKA8A68. only
Info: The appliance has an automatic
auto off (power save) function, which
switches the appliance to power-saving
mode a few minutes after the brewing
process is complete.
Tip: If you rinse out the thermos carafe with
hot water before use, the coffee will stay
warm even longer.
Important: When the brewing process is
complete, wait a moment until all the coffee
has run through the filter and into the carafe.
Let the machine cool down for five
minutes before brewing a fresh pot.
Timer function
This coffee machine is equipped with a timer.
It lets you set the time at which the machine
will automatically start the brewing process.
The timer works only if the machine is turned
on or in power-save mode.
The clock must be set to the correct
current time.
Press and hold down the button prog
while programming the timer (Fig. a).
Use button h to set the hour and button
min to set the minute at which you want
the brewing to start (Figs. b and c).
Release button prog to save the start
time. The display shows a little clock to
indicate that the timer function is activated.
Fill the machine with water and coffee as
usual and place the carafe under the filter
housing.
Loading ...
Loading ...
Loading ...