Loading ...
Loading ...
Loading ...
English 11
► Connect spray gun and pressure
hose.
► Open water source.
► Start the Engine
1. Turn the engine switch to "ON"
position.
2. Pull trigger on spray gun to release
pressure.
3. Locate recoil cord and pull slowly
until resistance is felt. At this point,
pull rapidly to start engine.
NOTE: If unable to start the engine,
repeat the above operation one or two
times.
Cleaning Procedure:
► Position the tip of the wand 6-8”
(15-20 cm) away from the surface to
clean at a 45°angle.
Loading ...
Loading ...
Loading ...