USER GUIDE
NZ AU GB IE SEA
GAS-ON-GLASS COOKTOP
CG01D, CG02D, CG451D, CG60D, CG604D, CG762D,
CG90D & CG905D models
CONTENTS
SAVE THESE INSTRUCTIONS
The models shown in this User guide may not be
available in all markets and are subject to change
at any time. For current details about model and
specification availability in your country, go to
our website fisherpaykel.com or contact your
local Fisher&Paykel dealer.
Registration
Register your product with us so we can
provide you with the best service possible.
To register your product visit our website:
fisherpaykel.com
Introduction 5
Safety and warnings 6
Before you begin 9
Cooktop use 10
Dual wok burner use 12
Cooking guide 13
Care and cleaning 15
Troubleshooting 18
Energy guidelines 20
Energy guidelines (GB & IE only) 21
Warranty and service 23
3
INTRODUCTION
Congratulations on your new purchase. Your Fisher & Paykel gas cooktop gives the ultimate
experience in gas cooking with speed and precision. You cooktop delivers powerful modern
functionality with a singular aesthetic treatment. Matte black detailing separates the control
panel from the black glass cooking surface, while black burners with anodised black dials
and trim complete the look for a cohesive, beautiful hob.
5
SAFETY AND WARNINGS
!
WARNING!
Electrical Shock Hazard
Failure to follow this advice may result in
electrical shock or death.
• Switch the power to the cooktop off at the wall
before cleaning or maintenance.
• Do not cook on a broken or cracked cooktop. If
the glass should break or crack, turn off the gas
supply and switch the appliance off immediately
at the mains power supply (wall switch) and
contact a qualified technician.
!
WARNING!
Fire Hazard
Failure to follow this advice may result in
serious injury.
• Never leave the appliance unattended when
in use. Boilover causes smoking and greasy
spillovers that may ignite.
!
WARNING!
Poisoning Hazard
Failure to follow this advice may result in
poisoning or death.
• Never use this appliance as a space heater to
heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of
the appliance.
6
SAFETY AND WARNINGS
!
WARNING!
Explosion Hazard
Failure to follow this advice may result in
death or serious injury.
• Do not use or store flammable materials such as
gasoline near this appliance.
• Do not spray aerosols in the vicinity of this
appliance while it is in operation.
!
WARNING!
Hot Surface Hazard
Failure to follow this advice may result in
serious injury.
• This appliance becomes hot during use. Do not
touch the cooktop components, burners, pan
supports or the glass when hot.
• Before cleaning, turn the burners off and make
sure the whole cooktop is cool.
WARNING!
To reduce the risk of fire, injury to persons or damage when using the appliance,
follow the important safety instructions listed below. Read all the guidance before
using the appliance.
General Use
z
Keep children away from the cooktop when it is in use.
z
Household appliances are not intended to be played with by children.
z
Children of less than 8 years old must be kept away from the appliance unless
continuously supervised. This appliance can be used by children aged from 8 years
and above, and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, if they have been given supervision or
instruction concerning the use of the appliance in a safe way and they understand
the hazards involved. Cleaning and user maintenance shall not be done by children
without supervision.
z
If the electrical supply cord is damaged, it must only be replaced by an
authorised person.
7
SAFETY AND WARNINGS
z
If the appliance is connected to the gas supply with a flexible hose, make sure that the
hose cannot come in contact with the bottom of the appliance or any sharp edges.
z
Ensure that the electrical connection plug is accessible after installation.
z
This appliance should be connected to a circuit that incorporates an isolating switch
providing full disconnection from the electricity supply.
z
Do not use an asbestos mat or decorative covers between the flame and the saucepan
as this may cause serious damage to your cooktop.
z
Do not place aluminium foil or plastic dishes on the cooktop burners.
z
Do not let large saucepans, frying pans or woks push any other pans aside. This could
make them unstable or deflect heat onto your benchtop and damage the surface.
z
Do not use a steam cleaner for cleaning this cooktop.
z
Saucepan handles may be hot to touch. Ensure saucepan handles do not overhang
other gas burners that are on. Keep handles out of reach of children.
z
Do not stand or place heavy objects on this appliance.
z
After use, ensure that the burner dials are in the ‘OFF’ (o) position.
z
Where this appliance is installed in marine craft or in caravans, it shall not be used as
a space heater.
z
Take care not to drop any heavy or sharp objects on the cooktop. The glass is tough,
but sharp or heavy objects falling on it (e.g. pepper mill, heavy-based frying pan) may
crack or chip it.
z
The use of a gas cooking appliance results in the production of heat and moisture in
the room in which it is installed. Ensure the kitchen is well ventilated. Keep natural
ventilation holes open or install a mechanical ventilation device (mechanical extractor
hood). Prolonged intensive use of the appliance may call for additional ventilation, for
example opening of a window, or more effective ventilation, for example increasing the
level of mechanical ventilation where present.
z
After having unpacked the appliance, check to ensure that it is not damaged. In case of
doubt, do not use it and consult your supplier or a professionally qualified technician.
z
Packing elements (eg plastic bags, polystyrene foam, nails, packing straps, etc.) should
not be left around within easy reach of children, as these may cause serious injuries.
z
Do not modify this appliance.
z
This appliance is to be serviced only by Fisher & Paykel trained and supported service
technician or qualified electrician in order to avoid a hazard.
z
Some products are supplied with protective film on steel and aluminium parts. This film
must be removed before using the appliance.
z
Never leave the cooktop unattended when in use. Boil-over causes smoking and greasy
spills that may ignite.
z
Never allow flames to extend beyond cookware or curl up its sides. This could discolor
and damage the utensil and you may get burned touching a hot handle.
z
Keep handles out of the way. Turn handles so that they don’t extend over the edge of
the cooktop or another burner that is on.
z
Take care when deep-frying. Oil or fat can overheat quickly, particularly on a high.
8
BEFORE YOU BEGIN
z
Read this guide, taking special note of the 'Safety and warnings' section.
z
Remove all packaging from the cooktop. Recycle responsibly.
z
Remove any adhesive residue using dishwashing liquid on a soft cloth. Do not use any
harsh or abrasive cleaners.
6
4
5
1
8
2
7
3
CG905D model illustrated
Cooktop features and accessories
1 Control panel
2 Burner dials
3 Burner indicators
4 Pan supports
5 Dual Wok pan support*
6 Small pan support*
7 Wok stand*
8 Serial label (cooktop base)
CG604D models only: Mini wok pan support
(not illustrated)
*Some models only
9
COOKTOP USE
Selecting and using the burners
Identify the desired burner and the
corresponding dial.
Turn the dial to any heat setting between
HIGH and LOW before releasing.
Do not set or leave the dial between
HIGH
and O (OFF).
When you have finished cooking, turn the
dial clockwise back to O (OFF).
1
2
3
4
Push the dial down and turn counterclockwise
to the highest heat setting. Once the burner is
lit, hold the dial down for a further 3 seconds.
Note: a clicking sound should be present
when igniting the burner. If no clicking is
present, turn the dial clockwise back to
O
(OFF)
and refer to ‘Troubleshooting’.
LOW HIGH OFF
10
COOKTOP USE
Manual lighting
If the burner will not light after several attempts, the burner can be manually lit. If you
have attempted to light the burner with the ignition, allow 1 minute for any accumulated
gas to dissipate before manually lighting.
Wait until the flame is burning evenly before
turning the dial to any heat setting between
HIGH and LOW before releasing.
Do not set or leave the dial between
HIGH
and O (OFF).
When you have finished cooking, turn the
dial clockwise back to O (OFF).
1
2
3
4
Carefully hold a lit match near the desired
burner.
Push the dial down and turn counterclockwise
to the highest heat setting.
Once the burner is
lit continue to hold the dial down for a further
3 seconds.
11
DUAL WOK BURNER USE
Adjusting the dual wok burner*
When using a dual wok burner, you can
choose to use the inner burner only or both
the inner and outer burners as desired.
Setting both the inner and outer rings
Turn the dial to any heat setting between
MEDIUM and HIGH before releasing.
If the flame on the outer ring appears to
flutter, turn the dial slightly towards
HIGH to
stabilise.
Setting the inner ring
Turn the dial to any heat setting between
MEDIUM and LOW before releasing.
When you have finished cooking, turn the
dial clockwise back to
O (OFF).
1
2
3
LOW MEDIUM
MEDIUM HIGH
Inner and outer burners Inner burner only
*Some models only
12
COOKING GUIDE
Burner Min. diameter (mm) Max. diameter (mm)
1 Auxiliary no minimum 220
2 Semi-rapid no minimum 220
3 Rapid no minimum 220
4 Mini wok
without small pan support 150 220
with wok stand no minimum 360
5 Dual wok
without small pan support 200 340
with wok stand no minimum 400
Cookware
2
3
2
2
2 2
1
1
4
2
2
2
5
5 5
5 5
5
5
5
1
CG905D models
CG762D models
CG451D modelsCG603D models
CG302D models
CG301D models
CG604D models
CG903D models
Note: measurements provided from base of pan
For optimal performance, ensure the size of the cookware is suitable for the burner in use.
13
COOKING GUIDE
Burner supports
Small pan support
The small pan support has been designed for use with dual
wok burners for supporting cookware with a base diameter
smaller than 200mm.
Using the small pan support
Ensure cooktop is cool before slotting the small pan support
onto the centre of the dual wok burner as shown. Ensure all
notches rest securely on the burner pan supports before use.
Wok stand
The wok stand has been designed for use with either dual wok
and mini wok burners (depending on your model) to allow the
safe use of a wok. This accessory must be used when cooking
with a wok.
Using the wok stand
Ensure cooktop is cool before slotting the wok stand onto the
centre of the dual wok or mini wok burner as shown. Ensure all
notches rest securely on the burner pan supports before use.
14
Ensure that all burner parts are correctly fitted. Incorrectly assembled burners may
produce dangerous flames. Flames should be blue with no yellow tipping, and burn without
fluttering around the burner cap.
CARE AND CLEANING
Replacing burner parts
Semi-rapid, rapid and auxiliary burners
Dual wok and mini wok burners
Burner cap
Burner skirt
do not remove
Burner skirt
do not remove
Burner cap
Burner ring
Flame spreader
Flame spreader
Ignitor
Ignitor
Probe
Probe
Incorrect alignment
Incorrect alignment
Correct alignment
Correct alignment
15
Burners should be cleaned regularly. Food residue may obstruct the ignitor and the notches
of the flame spreader, preventing the burner from functioning correctly. Refer to ‘Replacing
burner parts’ for details on safely removing and refitting burner parts.
All checking and maintenance must be performed by a suitably qualified person. If the gas
is connected with a flexible hose, checking should include inspecting the entire length of
the flexible hose assembly for any sign of wear or damage.
CARE AND CLEANING
Burners
All gas components
Burner caps, rings, flame spreaders and accessories
1 Remove the parts that you wish to clean.
2 Clean in hot soapy water with a stiff nylon brush,
stubborn stains can be soaked in powdered
dishwasher or laundry detergent. A straight
end paperclip can also be used to clear any
obstructions from the flame ports.
3 Rinse in warm water and dry thoroughly. Ensure
all parts are completely dry before refitting as wet
burner parts may result in an irregular flame.
4 Ensure all parts are replaced correctly.
Ignitor and probe
1 Remove the parts required to access the ignitor
and probe.
2 Clean carefully with a stiff nylon brush dipped
in methylated spirits ensuring any build up is
removed.
3 Ensure all parts are replaced correctly.
16
Ensure the correct pan support are used for each burner. Pan supports should be installed
in the correct orientation.
Locate the pan support to the two nodules on the burner cap to secure.
Locate the pan support to the three recesses on the burner skirt to secure.
CARE AND CLEANING
Pan supports
Semi-rapid, rapid and auxiliary burners
Dual wok and mini wok burners
Plan view
Plan view
recess
locations
nodules
17
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
There is a strong gas
smell
The gas connection could
be leaking.
Open a window and refer to your installation
guide for details on checking for leaks. Do not
use the until leak has been repaired.
There is a slight rubbery
or metallic smell when I
use the cooktop for the
first time
This is normal for first
use and is caused by
manufacturing residues
burning off.
The smell will disappear with use.
There is no clicking/
sparking
There is a power failure. You can still use your cooktop, but will need
to match-light the burners. Refer to ‘Manual
lighting’ for details.
The ignitor may be dirty
or wet.
Clean following guidance in ‘Care and
cleaning’.
There is clicking/sparking,
but a burner or burners
won’t light easily or at all
The gas supply may not
be turned on at the valve
or gas bottle.
Turn all the burners off, and check whether
the gas supply to the cooktop is turned on.
Wait 1 minute, then try relighting the burner,
holding the dial down for a few more seconds.
If the burner still doesn’t light, check other
possible causes below.
The gas supply to the
house may not be
working.
You should hear the gas when you turn a
burner on. If you use bottled gas, this may
indicate you are getting near the end of the
bottle and need to replace it.
Burner parts may be
clogged or wet.
Ensure parts are clean and dry. See ‘Care and
cleaning’ for guidance.
Burner parts may not have
been replaced correctly.
Check the assembly and ensure the burner
cap is sitting flat. See ‘Replacing the burner
parts correctly’ for details.
The burner goes out after
lighting
Dial not held down long
enough
Wait 1 minute, then try relighting the burner,
holding the dial down for a few more seconds.
The flame has been
extinguished
Blown out by draught The flame failure protection will automatically
cut the gas supply to the burner off, stopping
gas from escaping.
Extinguished by a spill Turn the affected burner off, then wait for at
least 1 minute before attempting to relight.
This is to allow for any accumulated gas to
disperse.
The flame goes out at
low settings
The gas supply pressure
may be low.
Check this with your service person or
installer.
18
PROBLEM POSSIBLE CAUSES WHAT TO DO
The flames are yellow or
yellow-tipped rather than
blue
Burner parts (especially
the flame ports) may be
clogged or wet.
Check that they are clean and dry, refer to
‘Care and cleaning’ for advice.
The cooktop may have
been connected to the
wrong type of gas or the
gas pressure is not correct.
Contact Customer Care and do not use your
cooktop until it has been checked by a trained
and supported service technician.
The flame pattern is
uneven around the
burner.
Burner parts (especially
the flame ports) may be
clogged or wet.
Check that they are clean and dry. Refer to
‘Care and cleaning’ for advice.
Burner parts may not have
been replaced correctly.
Check the assembly and ensure the burner
cap and/or ring is sitting flat on the flame
spreader. See ‘Care and cleaning’ details.
The flames are too large,
or too small.
The cooktop may have
been connected to the
wrong type of gas.
Contact Customer Care and do not use
your cooktop until it has been checked by a
qualified technician.
The flames are noisy.
The flames lift away from
the burner.
The glass surface of the
cooktop has chipped or
cracked.
Contact Customer Care and do not use your
cooktop until it has been repaired.
TROUBLESHOOTING
19
ENERGY GUIDELINES
In the United Kingdom:
Safety requirements of EEC regulation 2016/426
z
EN 30-1-1
z
EN 30-2-1
z
EN 437
Safety requirements of EEC Directive “Low voltage” 2006/95:
z
EN 60335-1 General Requirements for Domestic electrical appliances
z
EN 60335-2-6 Particular Requirements for Domestic electrical cooking appliances
Safety requirements of EEC Directive “EMC” 2004/108:
z
EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 Electromagnetic
Compatibility Requirements
Requirements of EEC Directive 93/68/EEC and 2011/65/EU
European directive 2012/16/EU on Waste Electrical and Electronic Equipment
(WEEE) (for European Union countries only)
GB This appliance is marked according to the European directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this
product.
The symbol
on the product, or on the documents accompanying the product, indicates
that this appliance may not be treated as household waste. Instead it shall be handed over
to the applicable collection point for the recycling of electrical and electronic equipment.
Disposal must be carried out in accordance with local environmental regulations for waste
disposal. For more detailed information about treatment, recovery and recycling of this
product, please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
20
ENERGY GUIDELINES (GB & IE ONLY)
ULPG Gas Energy Efficiency (%)* of burners with a power of greater than 1.15kW
NG Gas Energy Efficiency (%)* of burners with a power of greater than 1.15kW.
Energy consumption for gas cooking appliances are calculated using the following Standards:
BS EN 30-2-1 – Rational use of energy - Domestic cooking appliances burning gas
Burner
CG905DLPGB
Efficiency/(no.
of burners)
CG604DLPGB1
Efficiency/(no.
of burners)
CG603DLPPGB
Efficiency/(no.
of burners)
CG302DLPGB1
Efficiency/(no.
of burners)
CG301DLPGB1
Efficiency/(no.
of burners)
CG451DLPGB1
Efficiency/(no.
of burners)
CG752DLPGB1
Efficiency/(no.
of burners)
CG903DLPGB1
Efficiency/(no.
of burners)
Dual Wok/Mini wok 53.8% (1) 53.8% (1) 53.8% (1) 57.4% (1) 53.8% 53.8% (2) 53.8% (2)
Semi-rapid 59.4 % (2) 59.4%(2) 59.4% (2) 59.4% (1) 59.4% (1)
Rapid 55.1% (1)
Auxiliary 57.9% (1) 57.9% (1) 57.9% (1) 59.4% (1)
Energy efficiency
(%) of cooktop
57.1% 57.6 % 57.5% 58.7% 57.4% 53.8% 53.8% 55.7%
Burner
CG905DNGGB
Efficiency/(no.
of burners)
CG604DNGGB1
Efficiency/(no.
of burners)
CG603DNGPGB
Efficiency/(no.
of burners)
CG302DNGGB1
Efficiency/(no.
of burners)
CG301DNGGB1
Efficiency/(no.
of burners)
CG451DNGGB1
Efficiency/(no.
of burners)
CG752DNGGB1
Efficiency/(no.
of burners)
CG903DNGGB1
Efficiency/(no.
of burners)
Dual Wok/Mini wok 56.3 % (1) 56.8% (1) 56.3 % (1) 54.6% (1) 56.3 % (1) 56.3 % (2) 56.3 % (2)
Semi-rapid 54.3 % (2) 54.3 % (2) 54.3 % (2) 54.3 % (1) 54.3 % (1)
Rapid
57.3 % (1)
Auxiliary
na na na
Energy efficiency
(%) of cooktop
55.6% 55 % 55 % 54.3% 54.6% 56.3 % 56.3 % 55.6%
21
ENERGY GUIDELINES (GB & IE ONLY)
Reducing the environmental impact of cooking
Reducing energy consumption will reduce the impact of cooking on the environment. You
can reduce energy consumption by:
z
Thawing frozen foods in the refrigerator first
z
Using a moderate setting to conserve gas
z
Having your burners adjusted by a qualified technician if the flame is yellow
z
Ensuring burner parts are clean and dry, as clogged ports will reduce efficiency.
z
Using the correct sized pot
z
Adjusting the flame correctly – the flame should not extend beyond the edge of the pot
z
Using a pressure cooker
z
Cutting food into smaller pieces - this will reduce cooking time
z
Use a steamer or a pan with a divider to cook different vegetables at the same time
z
Using a cover when boiling water to reduce the time it takes to get to the boil.
z
Simmering liquid cooked foods instead of boiling vigorously
z
Keeping pot lids on to reduce heat loss
22
WARRANTY AND SERVICE
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer
Suburb
Tow n
Country
Before you call for service or assistance
Refer to the installation instructions and your user guide and check that:
z
Your product is correctly installed.
z
You are familiar with its normal operation.
If after checking these points you still need assistance or parts, please refer to the Service
& Warranty book for warranty details and your nearest Service Center, Customer Care, or
contact us through our website www.fisherpaykel.com
This cooktop has been designed and constructed in accordance with the following codes
and specifications:
In New Zealand and Australia:
z
Domestic AS/NZS 5263.1.1- 2016 Gas cooking appliances
z
AS/NZS 60335.1 General Requirements for Safety of household and similar electrical
appliances
z
AS/NZS 60335.2.102 Particular Requirements for gas, oil and solid-burning appliances
having electrical connections
23
NZ AU GB IE SEA
59217A 0.20
FISHERPAYKEL.COM
© Fisher & Paykel Appliances 2020 All rights reserved.
The product specifications in this document apply to the specific
products and models described at the date of issue. Under our policy
of continuous product improvement, these specifications may change
at any time. You should therefore check with your Dealer to ensure this
booklet correctly describes the product currently available.
