Loading ...
Loading ...
Loading ...
9
8
How to Assemble
Firmly insert the compression silicone into the
slot below pulp spout.
The Juicer may leak if not assembled properly.
Note
The juicing screw needs to be locked in its place in
order to close the drum lid.
Note
The
o
r
d
STEP 1
/ Top-set assembly
STEP 2
/ Top-set and base assembly
Assemble the strainer into the rotation wiper then
place this assembly in to the juicing bowl ensuring
the red dot
●
on the strainer is aligned with the
red dot
●
on the juicing bowl.
Place the juicing screw into the strainer. Turn and
press down on it until it clicks into place.
Place the drum lid on to the juicing bowl aligning
the red dot
●
on the drum lid with the red dot
●
on the juicing bowl. Turn clockwise to close
aligning the red on
●
on the drum lid with the
close mark .
* The products illustrated/photographed in this booklet may vary slightly from the actual product.
Silicone Ring / Silicone Brush
Silicone parts are able to be washed. Dry the parts
after washing.
→
After cleaning, push in the silicone ring with the
smaller surface facing down.
→
After cleaning insert into the slot with the tail
pointing down as shown in the illustration.
tail
Check before
operating
ㆍ
Wash the parts before fi rst use.
ㆍ
Ensure that the compression silicone and silicone ring are assembled properly.
1
2
3
4
Place the pulp cup under the pulp spout and place
the juice cup under the juice spout as shown in the
illustration.
7
Detachable
5
Place the drum lid on the juicing bowl. Align the
down arrow
▼
on the drum lid with the OPEN
mark on the base and turn to the CLOSE position.
The juicer will not operate if not assembled properly.
Note
The
Open/Close mark on the top-set.
6
Open
Close
Loading ...
Loading ...
Loading ...