Loading ...
Loading ...
Loading ...
18
To use 3D Glasses
Before use: Remove the battery’s insulating sheet before using the 3D Glasses for the first time.
Parts and components
1 Slide switch
Set the switch for a comfortable fit. Set
both the switches on either side for a
comfortable fit. Close the temple frames
slightly inwards to set the switch.
2 Battery cover
Detach the cover when replacing the
battery.
3 LED indicator
Flashes one time every 3 seconds: Power
on
Flashes three times every 3 seconds: Low
battery. Battery capacity is almost running
out.
Flashes three times: Power off
4 IR sensor
Receive signals from the 3D Sync
Transmitter.
IR’s entry angle differs according to
distance or usage environment.
~
• Please keep this face clean.
5 Power button
Power on: Press once
Power off: Hold power button down for 2
seconds
* Auto power off: More than 5 minutes without
IR signal
6 Nose pad
Adjust the nose pad for a comfortable fit.
7 Temple frames
You can bend (adjust) the temple frames
for a comfortable fit.
Pouch
3D Glasses
Increases the width
of the glasses
Decreases the width
of the glasses
This part receives IR
(infrared rays) from
the Transmitter.
Loading ...
Loading ...
Loading ...