Loading ...
English (Original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET
2
SPECIFICATIONS
Model G20
Rated Voltage 220-240V ~ 50 Hz
Rated Pressure 8 MPa
Permissible Pressure 11 MPa
Power Rating 1400 W
Rated Water Flow 5.6 l/min
Maximum Water Flow
7.6 l/min
Maximum Water Inlet
Pressure
0.7 MPa
Maximum Water Inlet
Temperature
40℃
LPA(sound pressure
level)
80dB(A), k:3.0dB(A)
LWA(sound power
level)
87.6dB(A), k:3.0 dB(A)
Protection Degree
IPX 5
Vibration < 2.5 m/s² K=1.5 m/s²
DESCRIPTION
See figure 1.
1. Trigger
2. Wand
3. Handle
4. Gun holder
5. ON/OFF Switch
6. Detergent Tank
7. Water Intake
8. High pressure hose
9. Retainer
10. Water outtake
11. Nozzle
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully open the carton, then remove the product
and any accessories from the carton.
If in doubt, call Greenworks Tools Customer Service
for assistance. Operation of a product that may have
been improperly preassembled could result in serious
personal injury.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
If any parts are damaged or missing, please contact
Greenworks Tools Customer Service for assistance.
WARNING
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result
in serious personal injury.
WARNING
Do not attempt to modify this product or create
accessories not recommended for use with this
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
PACKING LIST
- Main machine
- Detergent Tank
- Manual
- Rotary nozzle
- Adjustable fan jet nozzle
- Water inlet connecter
- Trigger and wand
- High pressure hose
- Screw (4)
ASSEMBLING THE SPRAY WAND (See Figure 2.)
Installing Wand to Pressure Washer Gun Insert the
male baynet end (12) of the wand into the female
bayonet outlet (13) firmly.While pushing in the wand
firmly,turn clockwise until tabs lock into place to
ensure a leak-free connection.
Loading ...
Loading ...
Loading ...