Loading ...
Loading ...
Loading ...
USE OF THE SELECTION CONTROLS
D
. SPIN VARIATION BUTTON 750/400
When this button is pressed, the spin after the last rinse will be at 400 r.p.m.
instead of 750 r.p.m.
E
. EASY-IRON BUTTON
This button works in all programmes except the 32-minute cycle.
It can be used to minimise wrinkling of fabrics during wash programmes.
The results obtained differ with each programme:
In programmes for RESISTANTS, pressing this button will cause the machine
to stop on the last rinse, leaving clothes soaking in water.
To complete the programme and spin the clothes, press the button again to
release it.
In programmes for MIXED SYNTHETICS, pressing this button will cut out the
intermediate spins and perform only one final spin at low sped, thus minimising
the stress suffered by fabrics.
In programmes for EXTREM. DELIC. FABRICS, pressing button will cause
the machine to stop on the last rinse, leaving clothes soaking in water.
To complete the programme and spin the clothes, press the button again to
release it.
Do not press this button if the “energetic spin” (resistants) programme
is selected.
G
. ON/OFF PILOT LIGHT
H
. ON/OFF BUTTON
USE OF THE SELECTION CONTROLS
A
. PROGRAMME SELECTOR KNOB
With this knob you can select the wash programme as you
wish. Press the knob and turn it until the programme (number
or symbol) coincides with the marker point.
ALWAYS ROTATE the control in a clockwise direction, never
in an anticlockwise direction. Do not press the “on” button
(H) before selecting the programme
.
If you wish to modify the position of the control or select
another programme once a cycle has commenced, press
the On/Off button. Press again to recommence once the
modification has been completed.
B
. TEMPERATURE SELECTOR KNOB
With this knob you can select the washing temperature as
you wish. Press the knob and turn it until the temperature
desired coincides with the marker point.
If you wish to carry out a cold wash, turn the knob until the
cold symbol coincides with the selector mark.
THE KNOB CAN BE TURNED IN BOTH DIRECTIONS.
Do not exceed the maximum temperature recommended for
each cycle in the table of programmes.
35
36
Loading ...