Loading ...
Loading ...
Loading ...
36
English
Clock/Timer
Clock setting
See "Preparations-Step 2: Setting the clock".
Timer setting
● The system can be used as an alarm clock,
whereby the last selected source is switched on
at a set time (one time operation). The clock
time needs to be set first before the timer can
be used.
1 In standby mode, press and hold SLEEP/
TIMER on the remote control for more than
three seconds.
➜ "SET TIMER" is displayed briefly. Then, the
hour digits flash on the display panel.
2 Tu rn the VOLUME -/+ control on the front
panel or press VOL +/- on the remote to set
the hours and press SLEEP/TIMER to
confirm.
➜ The minute digits flash on the display panel.
3 Tu rn the VOLUME -/+ control on the front
panel or press VOL +/- on the remote to set
the minutes and press SLEEP/TIMER to
confirm.
➜ "ON" or "OFF" flashes.
4 Turn the VOLUME -/+ control on the front
panel or press VOL +/- on the remote to
activate or deactivate the timer and press
SLEEP/TIMER to complete the setting.
➜ Display shows if activated, and disappears
if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1 In active mode, press SLEEP/TIMER on the
remote control repeatedly to select a preset
time.
➜ The selections are as follows (time in
minutes):
SLEEP OFF ™ SLEEP 10 ™ SLEEP 20 ™
SLEEP 30 ™ SLEEP 40 ™ SLEEP 50 ™
SLEEP 60 ™ SLEEP 70 ™ SLEEP 80 ™
SLEEP 90™ SLEEP OFF
2 When you reach the desired length of time, stop
pressing the SLEEP/TIMER button.
To deactivate the sleep timer
● Press SLEEP/TIMER repeatedly until "SLEEP
OFF" is displayed, or press ECO POWER/
STANDBY ON y (or y on the remote).
pg001-pg040_MCD296-22-Eng 2007.1.21, 17:3036
Loading ...
Loading ...
Loading ...