Loading ...
Loading ...
Loading ...
Fig. 3
The height of the freezer door is 24-24/32 in. (629 mm).
u
In order to cover the bottom section of the appliance:
extend the plate height to 27-3/8 in. (695 mm).
The thickness of the floor plate is normally 3/4 in.
(19 mm).
u
In order to cover the front of the floor plate
Fig. 3 (a)
:
extend the plate height to 27-3/8 in. + 3/4 in. =
28-1/8 in. (695 mm + 19 mm = 714 mm).
If no cabinet doors have yet been fitted the gap between
the freezer section door
Fig. 3 (4)
and the fridge section
door
Fig. 3 (3)
is19/32 in. (15 mm) After the cabinet doors
have been fitted the gap between the two doors
Fig. 3 (1,2)
is about 1/8 in. (3 mm) and must be inside the hatched
area.
Of course, the final door height depends on the size of the
gap on the doors of the kitchen cabinets that are to the
right and left of the fitted appliance cabinet.
If there are other cabinets next to the fitted appliance
cabinet they normally have a gap between two drawers or
doors. Depending on the design of your kitchen these
gaps are about 1/8 in. (3 mm) wide.
u
In this case increase the plate height to 27-3/8 in. +
3/4 in. + 19/32 in. - 1/8 in. = 28-19/32 in. (695 mm +
19 mm + 15 mm - 3 mm = 726 mm).
The height of the refrigerator door leaf is calculated as
follows:
Cabinet door
6 * Depending on model and options
Loading ...
Loading ...
Loading ...