Loading ...
Loading ...
Loading ...
EN
6
Technical data
Dimensions
width 60 cm
height 85 cm
depth 60 cm
Capacity 14 standard place-settings
Water supply
pressure
0,05 ÷ 1MPa (0.5 ÷ 10 bar)
7,25 – 145 psi
Power supply
voltage
See appliance data plate
Total absorbed
power
See appliance data plate
Fuse See appliance data plate
This dishwasher conforms to the
following European Community
Directives:
-2006/95/EC (Low Voltage)
-2004/108/EC (Electromagnetic
Compatibility)
-2009/125/EC (Comm. Reg.
1016/2010) (Ecodesign)
-97/17/EC (Labelling)
-2012/19/EU Waste Electrical
and Electronic Equipment (WEEE)
* Only available in selected models.
Warning for the first wash
After installation, remove the buffers placed on the baskets
and the retaining bands on the upper basket (where
provided)
Water softener settings
Before starting the first wash, set the hardness level of the
mains water. (see chapter Rinse aid and regenerating salt)
The first loading of the softener reservoir must take place with
water, then introduce about 1 kg of salt; it is normal for water
to escape.
Start a wash cycle immediately afterwards.
Use only dishwasher-specific salt. After charging, the LACK
OF SALT * indicator goes out.
Failure to fill the salt container may cause damage to the
water softener and the heating element.
The machine is equipped with acoustic / tone signals
(according to the model of dishwasher) that warn of the
command: ignition, end of cycle etc.
The symbols / lights / LEDs on the control panel / display
may vary in color, pulsate or be in constant light (according
to the model of dishwasher).
The display displays useful information related to the type of
cycle set, to the washing / drying phase, to the remaining time,
to the temperature, etc.
Loading ...
Loading ...
Loading ...