Loading ...
Loading ...
Loading ...
13
Take great care to assign the same color to the (+) terminal on both the speaker and the
amplifier. IC6-ST: See the section, "Connecting the IC6-ST".
7. Set your power drill to the low setting.
8. Ensure the clamps on the lip of the speaker are positioned exactly as shown in the Warning
Diagrams.
9. Gently push the assembly into the ceiling or wall hole (Figs. 5c & 6c).
10. Supporting the assembly with one hand, tighten each screw. Stop tightening when you sense
resistance (Figs. 5d & 6d). IC6-ST and IC6-HT: Before tightening screws orient speaker so
the drivers are positioned towards the desired position.
11. Gently press the grille into place (Figs. 5e & 6e).
Painting the Speaker Grille
IMPORTANT! Before painting remove grille from speakers. Do not paint the surface of the speaker
behind the grille. Do not use a paint roller.
1. Remove the grille from the speaker.
2. Paint the grille, being careful not to plug the holes. For best results use a spray rather than a
brush. Allow the paint to completely dry before proceeding. Do not paint the surface behind
the grille.
Loading ...
Loading ...
Loading ...