Loading ...
Loading ...
Loading ...
Energy saving cooling mode
This mode minimizes power consumption
during cooling and increases the set
temperature to the optimal level for a more
comfortable environment.
1 Press d to turn the power on.
2 Press f repeatedly to select the cooling
operation.
3 Press b.
-
G is displayed on the display screen.
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1 Press
\
repeatedly to set the
brightness to the desired level.
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores
the previous settings. This function is a
factory default setting.
1 Open the front cover.
- Lift up both sides of the cover slightly.
2 Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp
will blink 6 times.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the blue lamp
will blink 4 times.
16
ADVANCED FUNCTIONS
ENGLISH
Signal
receiver
Front Panel
Air
Discharge
Air Filter
ON/OFF button
Disabling auto restart
* The feature can be changed according to
type of model.
NOTE
!
Possible to display different temperature
between remote controller and air
conditioner during operation.
NOTE
!
This function may not be supported,
depending on the model.
NOTE
!
If you press and hold the On/Off button
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test operation.
In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default
settings.
Loading ...
Loading ...
Loading ...