Loading ...
Loading ...
Loading ...
16
Bridge Function This function allows to use the 2 cooking zones at the right at same time with the
(60X60model only) same features as a single cooking zone. Booster function isn’t allowed.
1 – rotate both knobs, rear right and front right, at the same time in the P position
and keep the knobs in that position.
2 – we see that the ∏ symbol blinks in the display, then after a few seconds the ∏
symbol appears on the rear right display and the front right display shows the power
level.
3 – to control the bridge power level use the knob 4 (front right zone). If you turn the
knob 3 (rear right zone) the display shows a horizontal segment and the bridge
function ends.
HOB
ATTENTION:
Metal items such as cutlery or lids must never be placed on the surface of the hob since they may become
hot.
Cooking zones The appliance is equipped with 4/5 cooking zones having different diameters and
powers. Their positions are clearly marked by rings, while the heating power is only
released in the area shown on the ceramic hob. The 4/5 cooking zones are of HIGH-
LlGHT type and start to heat up a few seconds after they are switched on. The heat
level of each zone can be regulated from the minimum to the maximum setting using
the knobs on the front panel.
Underneath each cooking zone there is a coil called an inductor, supplied with power
by an electronic system, which generates a variable magnetic field. When a pan is
placed inside this magnetic field, the highfrequency currents concentrate directly on
the bottom of the pan and produce the heat needed to cook the foods.
The 4/5 lights between the cooking zones come on when the temperature of one or
more cooking zones exceeds 60° C.. The lights go out when the temperature drops
to below about 60° C.
60x60 model 90x60 or 100x60 model
Loading ...
Loading ...
Loading ...