Loading ...
Loading ...
Loading ...
Options
52
Buzzer tones
A sequence of audible tones will sound
at the end of the program or if there is a
fault.
The buzzer at the end of a program and
the warning buzzer in the event of a
fault will sound 4 times at intervals with
a short pause between each set.
The buzzer tones are switched off at the
factory.
If you want the buzzer to sound at the
end of a program, you will have to
switch it on. Buzzer tones for faults are
always active.
Open the door.
Turn the dishwasher off with the
button, if it is turned on.
Press the program selection button
and simultaneously switch the dish-
washer on using the button.
Keep the program selection button
pressed in for at least four seconds
until the lower right program indicator
light comes on.
If this does not happen, start the proce-
dure from the beginning again.
Press the button 4 times.
The indicator light will flash 4 times
at short intervals.
The flashing sequence in the time dis-
play shows whether the buzzers at the
end of the program are activated or de-
activated.
– : Buzzer tones activated
– : Buzzer tones deactivated
Press the program selection button
to change the setting.
The setting is now saved.
Turn the dishwasher off with the
button.
Loading ...
Loading ...
Loading ...