Schwinn IC7 User Manual

Loading ...

8. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are properly assembled.

Be sure to record the serial number in the field provided at the front of this manual.

Do not use or put the machine into service until the machine has been fully assembled and inspected for

correct performance in accordance with the Owner’s Manual.

Installing Shoe Clips (Cleats) on Cycling Shoes (optional accessory)

Note: TheshoecleatstboththerightandleftPedals.

Tools needed:pliers,4mmhexkey

1. Withapairofpliers,pullofftherubbercovertoexpose

the cleat mounting holes on the bottom of the cycling

shoe.

Note: This step may not be necessary, depending on the

type of shoe.

2. Remove the sockliner and put the cleat nut in position

over the oval holes inside the shoe.

Note: This step may not be necessary, depending on the

type of shoe.

3. From the bottom of the shoe, put a cleat in position over

the cleat holes and then a cleat adapter. Be sure the

single arrow on the cleat points toward the toe of the

shoe. Tighten the cleat mounting bolts (2.5 N·m).

4. The cleat has an adjustment range of 20mm front to

back and 5mm left to right. Practice engaging with the

Pedal and releasing, one shoe at a time. Readjust to

determine the best cleat position.

5. Usinga4mmhexkey,fullytightenthecleatmounting

bolts(5–6N·m).

4 mm

SR-168

Loading ...

Schwinn IC7 Indoor Cycling Bike