Loading ...
Loading ...
Loading ...
113
GB
continued on next page
Miscellaneous
Symptom Cause Corrective Action
Auto focus does not work. AF switch is set to MF Set the AF switch to AF
(manual focus) (auto focus).
Pictures are being taken in Manually set the focus.
conditions where auto focus (page 38)
does not work.
Picture is dark. Subject is backlit. There is Correct the brightness.
insufficient light. (page 57)
When shooting a bright These lines are called The camera is not
subject, vertical lines appear "smears." malfunctioning.
on the picture.
Black dots appear on LCD Extremely precise technology The camera is not
monitor or red, blue, and green is being used for the liquid malfunctioning. The dots will
dots cannot be erased. crystal display. not be recorded.
LCD display in the viewfinder The eyesight level is not Adjust the viewfinder focus to
is blurry. properly adjusted. suit your eyesight. (page 34)
Picture is improperly exposed. EV compensation is set. Set the EV compensation to
+/- 0 and try shooting again.
(page 57)
The camera is in shutter speed Change the shutter speed to a
priority AE mode and has been more suitable speed using the
set to an inappropriate speed. shift dial. (page 52)
Picture is improperly exposed The flash is too far from the Use the flash within a range of
when using the flash. subject. approx. 1.0 m to 2.5 m.
The flash does not work. There is enough light, and the When you want the flash to
flash is not necessary. (when always go off, set it to “On”.
the flash is set to “Auto”) (page 79)
The flash is set to “Off”. Set the flash to “Auto” or “On”.
(page 79)
Loading ...
Loading ...
Loading ...