Loading ...
Loading ...
Loading ...
3
Point the remote control of the TV at the remote control
sensor of this unit and press the remote control button
to be learned (e.g. the button to increase the volume)
once.
If learning is successful, the rightmost status display LED blinks in
blue three times.
If learning is unsuccessful, the rightmost status display LED blinks in
red three times. Repeat steps 2 and 3 if this happens.
0
When the status LEDs blink in white again, press the TV remote control
button (e.g. the button to increase the volume) once more.
4
To learn a new function, repeat steps 2 and 3 with the
next function.
5
Press and hold the main unit’s d for 3 seconds or
more.
The rightmost status display LED blinks white three times and
indicates that the remote control learning mode is completed.
6
Confirm that the operation (e.g. increasing the volume)
can be performed on this unit with the TV remote
control.
0
To delete all learned data, press and hold d on the sound bar for 10 seconds
until the rightmost status display LED blinks white five times.
0
Operations cannot be performed with the remote control learning function during
the standby that is set when the Bluetooth standby function or HDMI pass through
function is off.
0
Other operations cannot be performed when in remote control learning mode.
0
Remote control learning may not be possible depending on the type of TV remote
control.
0
The power button of TVs learned with the remote control learning function cannot
be operated when Quick Start mode is off.
Contents Connections Playback Settings Tips Appendix
30
Loading ...
Loading ...
Loading ...