Dji OSMO User Manual

Loading ...

Using the Osmo

OSMO User Manual

The external microphone will override audio reception of the built-in microphone.

It is normal for the built-in microphone to pick up some noise from the gimbal motors.

[10] Key Combination

Restore Default Wi-Fi Settings: Hold down the Trigger and Shutter Button at the same

time. Then, pull the power switch down until the System Status Indicator blinks green.

Release the power button before releasing the Trigger. The default SSID, password and

frequency for the Wi-Fi connection will be restored.

Turn on/off the Osmo's Wi-Fi: Press and hold the trigger, then pull down the power

switch, then release both power switch and trigger. Wi-Fi is off when the system status

LED blinks twice. Repeat to turn on Wi-Fi (when using rmware v1.5.2.0 or higher).

Operation Modes

Upright Mode

Upright Mode can be used without any user input. In this mode, quickly tap the trigger twice

to center the camera.

Quickly tap the trigger three times and the camera will point at you, ready for a sele.

External

MicrophoneInput

Built-inMicrophone

Trigger

Loading ...

Dji OSMO Gimbal