Loading ...
Loading ...
Loading ...
Problem solving guide
61
General problems with the tumble dryer
Problem Possible cause and remedy
There are operating
noises (whirring/
humming).
This is not a fault.
The compressor (heat pump) is operating.
No action is required. These noises are normal and
caused by the operation of the compressor.
A programme cannot be
started.
There is no obvious cause.
Connect the tumble dryer to the mains electricity
supply
Turn on the tumble dryer.
Close the door.
Check whether the mains fuse has tripped.
Has there been a power cut? When power is
restored, any previously running programme will
restart automatically.
The display is dark and
the Start/Add laundry
sensor is flashing
slowly.
The display has switched off automatically to save
energy (Standby mode).
The drum will turn at intervals in the Anti-crease
phase.
Touch any sensor. This switches Standby off.
The dryer is switched
off at the end of the
programme.
The tumble dryer switches off automatically. This is
not a fault, but a normal function.
The display is in a
different language.
A different language has been selected in “Settings -
Language ”.
Set the language you want. The flag symbol serves
as a guide.
The interior drum
lighting does not come
on.
This is not a fault. The drum lighting switches off
automatically in the following cases:
If the door is closed.
If the door remains open for an extended period of
time.
Loading ...
Loading ...
Loading ...