Loading ...
Loading ...
Loading ...
*Maximum Water added with any combination of options is 4.8 gallons (18.2L).
OPTIONS CAN BE
SELECTED
WITH
WHAT IT DOES ADDED TIME
TO CYCLE
ADDED
WATER
GALLONS*
(LITERS)
Sanitizes dishes and glassware in accordance with NSF
International NSF/ANSI Standard 184 for Residential
Dishwashers. Certified residential dishwashers are not
intended for licensed food establishments. Only sanitizing
cycles have been designed to meet the requirements of the
NSF/ANSI 184 performance standard for soil removal and
sanitization efficacy. There is no intention, either directly or
indirectly, that all cycles on a NSF/ANSI 184 certified
dishwasher meet the NSF/ANSI 184 performance standard
for soil removal and sanitization efficacy.
Sani Rinse indicator is lit at the end of the cycle if the Sani
Rinse option was successfully completed. If indicator does
not light, it is probably due to the cycle being interrupted.
SoilSense
Heavy
Normal
Raises the main
wash temperature
to 135°F (57°C)
and the final rinse
temperature to
156°F (69°C)
0:05 to 1:06 0 to 3.9
(0 to 14.6)
Raises water temperature to improve cleaning for loads
containing tough, baked-on food.
SoilSense
Heavy
Normal
Soak & Prewash
Raises the main
wash temperature
to 135°F (57°C)
0:05 to 0:13 0 to 3.9
(0 to 14.6)
Dries dishes with heat. This option, with the use of rinse aid,
will provide the best drying results. Plastic items are less
likely to deform when loaded in the top rack. Use Heated Dry
for optimum drying performance or turn the Heated Dry
option off for air dry.
SoilSense
Heavy
Normal
1 Hour
Soak & Prewash
Uses a heating
element to speed
drying times.
Heated Dry option
defaults to On
when any cycle is
selected except
for 1 Hour Wash
and Light.
0:08 to 0:46 0
Turns the heating element on at the end of the wash portion
of the cycle. Its shorter heating time uses significantly less
energy compared to using Heated Dry.
Available with
any cycle
0:11 0
Delay displays how many hours before the cycle will begin.
To delay the start
1. Select a wash cycle and options.
2. Press the delay button. Each time you press DELAY, it will
display the next available delay time.
3. Press START to begin the delay countdown.
Available with
any cycle
Delays start of a cycle up to 24 hours
.
NOTE: If the door is opened, such as to add a dish, the start button must be pressed to resume the delay countdown
Control Lock Use the Control lock option to avoid unintended use of dishwasher between cycles, or cycle and option changes during a cycle.
To turn on Control Lock, press and hold SANI RINSE for 3 seconds. Control Lock light will stay on for a short time, indicating that it
is activated. When the Lock indicator is lit all buttons are disabled. If you press any button while your dishwasher is locked, the light
flashes 3 times. The dishwasher door can still be opened/closed while the controls are locked.
To turn off Control Lock, press and hold SANI RINSE for 3 seconds. Control Lock light turns off.
Control Purpose Comments
Press to start or resume
a wash cycle.
If the door is opened during a cycle or the power is interrupted, the Start/Resume button
LED flashes. Cycle will not resume until door is closed and START/RESUME is pressed.
Press to cancel wash
cycle.
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let
dishwasher drain completely.
To follow progress of your
dishwasher cycle.
NOTE: Indicators shown
are not available on all
models.
The Complete indicator will glow when a cycle is finished. (depending on your model)
If you select the Sani Rinse option, when the cycle is finished, the “Sanitized” indicator
glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the
end of the cycle. This can happen if the cycle is interrupted, or water could not be
heated to required temperature. The light goes off when you open and close the door or
press CANCEL.
Loading ...
Loading ...
Loading ...