Loading ...
Loading ...
Loading ...
Description
«PROTECT CONCEPT» safety system *
Your generator is tted with the «Protect Concept» system:
• Double protection cover.
• Cover automatically locks when it is folded up over the iron and open using the unlocking button .
• Carry handle .
Locking system *
Your steam generator is fitted with a retaining hoop to hold the iron onto the base with a locked position for
easy transport and storage:
• Locking. • Unlocking.
To transport your steam generator using the handle of the iron:
- Put the iron on the steam generator iron rest and raise the retaining hoop over the iron until it locks into place (audible click).
- Hold the iron by the handle to transport your steam generator.
Preparation
What water may be used?
• Tap water:
Your appliance has been designed to function using untreated tap water. If your water is very hard, we recommend you
use a mix of 50% untreated tap water and 50% distilled water available in hardware stores.
• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic
waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance: water from
clothes dryers, scented or softened water, water from refrigerators, batteries, air conditioners, rain water, boiled, ltered or bottled
water. These types of water should not be used in your TEFAL iron. Also only use distilled water as advised above.
Always remember:
Never use rainwater or water containing additives (like starch, fragrance or water from domestic appliances). Such
additives can affect the steam properties and at high temperature, form deposits in the steam generator chamber
which are likely to stain your washing
Filling the water tank
• Pull the cover up over the iron until the protection system automatically locks (you will hear a «click» )*
• Remove the detachable water tank using the handle (located at the front of the steam generator)
• Fill the water tank without exceeding the Max level
• Push it back into its housing until you hear a «click»*
• Press the unlocking button on the protective cover until you hear a click, and then fold it back on to the generator base unit*
Switch the steam generator on
• Place the steam generator on a at, stable, horizontal surface that is heat resistant.
• Always ensure that the base unit is positioned close enough to the ironing surface to avoid straining and wear of the steam cord.
• Pull out and completely unwind the power cord and take the steam cord out of its storage space.
• Plug your steam generator into an earthed socket.
• Press the «ON-OFF» button.
• When the iron is turned on, the «SYNTH.» indicator ashes - as does the light on the iron.
The light on the iron remains ashing until the iron is ready for use (after approximately
2minutes).
The SYNTH. / SILK / WOOL / COTTON / LINEN indicators control the temperature and
steam ow combinations which adjust to the different types of fabrics. They may be selected
at any time.
1. Steam control button
2. Power cord storage button
3. Double protection cover*
4. Carry handle
5. Power Zone button
6. Aquaboost vaporizer - pressurised spray
7. Retaining clip for locking iron on the base unit
8.
Handle for removing and replacing the detachable water tank
9. Boiler (in the base unit)
10. Steam cord storage compartment
11. Anti-calc collector
12. Control panel
a. «ON-OFF» button with light
b. «Water tank empty» light and «OK» button
c. «Anti-Calc» light and «OK» button
d. «ECO» button
e. Iron temperature adjustment button
13. Gliss/Glide Protect
TM
Autoclean soleplate
The first time the
appliance is used, there
may be some fumes
and smell but this is
not harmful. They will
not affect use and will
disappear rapidly.
PLEASE REFER TO SAFETY INSTRUCTIONS AT THE BEGINNING
OF THIS BOOKLET BEFORE USING YOUR APPLIANCE
*
Depending on model
1800137206 GV89XX G0.indd 19 08/10/15 10:48
Loading ...
Loading ...
Loading ...