Loading ...
Loading ...
Loading ...
ADVANCED FUNCTIONS
17
ENGLISH
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores
the previous settings. This function is a
factory default setting.
1 Open the front grille.
- Lift up both sides of the cover slightly.
* The feature can be changed according to
type of model.
2 Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp
will blink 6 times.
* The feature can be changed according to
type of model.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the blue lamp
will blink 4 times.
ON/OFF
button
Disabling auto restart
NOTE
!
• If you press and hold the On/Off button
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test
operation.
• In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default
settings.
Cleaning the air filter
Clean the air filter once every 2 weeks or
more if necessary.
1 Turn off the power and unplug the power
cord.
2 Open the front grille.
- Lift up both sides of the cover slightly.
* The feature can be changed according
to a type of model.
3 Hold the knob of the air filter, lift it up
slightly and remove it from the unit.
* The feature can be changed according
to a type of model.
4 Clean the filter with a vacuum cleaner or
with warm water.
- If dirt is difficult to remove, wash the
filter in lukewarm water with detergent.
5 Dry the filter in the shade.
NOTE
!
• The location of the filters may differ,
depending on the model.
• The feature can be changed according
to type of model.
Loading ...
Loading ...
Loading ...