Loading ...
Loading ...
Loading ...
24
ompleting the installation
ecirculation mode, then you should
ow fit the two carbon filters. See the “Fitting the carbon filters”
be connected to the electrical supply. See page
6 – 17 for detailed information on the electrical connection.
Refit the grease filter and then switch on the mains supply
correctly by selecting each speed and switching the light
bulbs on and off.
C
If you are setting the appliance to r
n
section on page 15.
The electrical connection must correspond to the electrical requirement
noted on the rating plate, which is placed inside the cooker hood. The
appliance should now
1
Use a stainless steel cleaner on the stainless steel sections of the
appliance.
to the appliance. Check that the appliance is operating
n mode or recirculation mode?
Extractio
hat is the difference between extraction and recirculation
o get optimum performance from your cooker, the air will be taken
nfortunately if you live in a flat or the hood is too far from an outside
en via an opening in the hood
.
but if you are using your cooker
ood in recirculation mode, then a charcoal filter must be fitted in
W
modes?
T
out of the room via external ducting.
U
wall, this may not be possible. The only alternative is to recirculate the
air.
In recirculation mode stale air is taken via the grease filter, and passed
through a charcoal filter for purification. The air then re-enters the
kitch
What is a charcoal filter and do I need one?
All cooker hoods have a grease filter
h
addition to the grease filter.
Loading ...
Loading ...
Loading ...