Loading ...
Loading ...
Loading ...
5
Carton Inventory
Introduction
Door Operator
Cable Tension Monitor
with 2-Conductor
Green/White Bell Wires
Mounting
Bracket
Collar with
Set Screws
LMi5 Dock Door
Operator Interface
Accessory
Safety Reversing
Sensor Bracket (2)
Emergency Release
Sash Chain and
S-hooks (2)
The Protector System (2) Safety
Reversing Sensors (1 Sending
Sensor and 1 Receiving Sensor)
with 2-Conductor White and
White/Black Bell Wire attached
Safety Labels
and Literature
Hardware
Your door operator is packaged in one carton which contains the motor unit and the parts illustrated below. If anything is missing,
carefully check the packing material.
Three Button
Control Station
Screw #10-32 (2)
Screw 14-10x2" (4)
Screw 1/4"-20x1/2" (2)
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
Additional Items You May Need
Extension brackets (Model 041A5281-1)
or wood blocks: Depending upon building
construction, extension brackets or wood
blocks may be needed to install the safety
reversing sensor.
Fastening hardware: Alternate floor
mounting of the safety reversing sensor
will require hardware that is not provided.
1/2" Cable Gland/Fittings for LMI5 (2):
May be required for LMI5 accessory
installation
Wire (14-24AWG, Solid recommended):
Wiring LMI5 accessory to DDO8900W as
well as additional sensor accessories.
90˚ connector for cable conduit or flex
cable adapter: Required for permanent
wiring.
Battery Backup (Model 485LM): The unit
is battery backup compatible (battery not
included). The battery can provide additional
power during normal operation and backup
power when the main power is out.
Automatic door lock (Model 841LM): The
automatic door lock is used to prevent the
door from being manually opened once the
door is fully closed.
Smart LED Light (827LM): A wireless light
that can program to the door operator or a
remote control.
NOT SHOWN
Quick User Guide
114A5055
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Horn Strobe (12-30VDC)
Three-button Control Station Open
Close
Common
Stop
Single-button
Control
Station
LMi5 CMD
Safety Sensor Cable Tension Monitor
Cable Tension MonitorSafety Sensor
Interlock or Jumper
(max. 2 supported)
Terminal Block Wiring Layout
NOTE: If you are not installing a three
button control station, please refer to the
important note on page 11.
Loading ...
Loading ...
Loading ...