Cosmo COS-DFR304 DFR304 30 in Slide-In Free-standing Dual Fuel Range | Pro-Style 4 Sealed Burner Gas Rangetop , 3.9 cu. ft. Electric Convection Oven and Stove Cast Iron Grate Wok Attachment - Stainless Steel

User Manual - Page 10

For COS-DFR304.

PDF File Manual, 46 pages, Download pdf file

Loading ...
Loading ...
Loading ...
10
Rating Label
The appliance shall be connected to a single
phase electric line rated at 120 208Vac or 120/
240Vac and 60Hz frequency.
ELECTRIC POWER RATING
• 120/208Vac: 10 A max
• 120/240Vac: 12 A max
HEATING ELEMENTS POWER RATING
• Oven bake element = 1500 Watt
• Oven circular element = 3200 Watt
• Oven broil element = 2850 Watt
Install a suitable electric power supply
receptacle connection type NEMA 14-50R able
to support a load of at least 30 A (per line)
according to local code requirements. For four
wires power supply connection system see
diagram below.
Check your local code for which of the options
below should be used in grounding the
receptacle power suppliy connections.
FOUR WIRES CONNECTION
Connect the L1 receptacle terminal to the
incoming BLACK electrical supply wire(L1-hot
wire)
Connect the L2 receptacle terminal to the
incoming RED electrical supply wire (L2-hot
wire)
Connect the NEUTRAL receptacle terminal to
the incoming NEUTRAL (WHITE) electrical
supply wire
• Connect the GROUND receptacle terminal to
the incoming GROUND (GREEN) electrical
supply wire
ELECTRICAL GROUNDING
This appliance is equipped with a four-
prong plug for your protection against
shock hazard and should be plugged
directly into a properly grounded
receptacle, do not cut or remove the
prong from this plug.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect electrical power at the
circuit breaker box or fuse box before
installing the appliance. Provide
appropriate ground for the appliance.
Use copper conductors only. Failure to
follow these instructions could result
in serious injury or death.
DO NOT USE EXTENSION CORDS
WITH THIS APPLIANCE AS IT MAY
RESULT IN FIRE, ELECTRIC SHOCK
OR OTHER TYPE OF PERSONAL
INJURY.
Label all wires prior to disconnecting
when servicing controls. Wiring errors
can cause improper and dangerous
operation. Verify proper operation after
servicing.
When working with electrical
connection, please refer to the rating
label, the rating label is located near the
entrance of power supply cord.
ELECTRICAL CONNECTION
Loading ...
Loading ...
Loading ...