Sun Joe WA24C-LT-SJG-RM 24-Volt iON+ Multi-Purpose Clean-Anywhere Portable Spray Washer 116 PSI Max* 1.5 GPM* 5-Gallon W/ 2.5-Ah Battery and Charger Certified Refurbished, Green

User Manual - Page 11

For WA24C-LT-SJG-RM.

PDF File Manual, 20 pages, Read Online | Download pdf file

WA24C-LT-SJG-RM photo
Loading ...
Loading ...
Loading ...
11
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery
mWARNING! This charger does not automatically
turnowhenthebatteryisfullycharged.Please take care
not to leave the battery plugged into the charger. Switch
oorunplugthechargeratthemainswhenchargingis
complete.
4. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
Operation
Starting + Stopping
mIMPORTANT! This pressure washer is equipped with
a micro-switch sensitive to water ow. This Total Stop System
(TSS) senses water ow in the pump. When the trigger is
released, water stops owing through the pump. The TSS then
automatically turns the motor o to protect the pump from
overheating, thus saving energy and prolonging pump life.
1. Fill the water tank with clean water (Fig. 5).
mWARNING! The intake water temperature must not
exceed 140ºF/60ºC.
mCAUTION! The washer must only be used with clean
water; use of unltered water containing corrosive chemicals
will damage the washer.
2. Open the battery compartment cover and slide the battery
in until it clicks to lock it into position, then close the
battery compartment cover (Fig. 6).
3. Position the washer as CLOSE as possible to the
object that need to be cleaned.
NOTE: The washer must be used on a secure and stable
surface in a standing, upright position.
4. Press the ON (I) side of the On/O switch to start the
portable washer and squeeze the spray gun trigger to use
the machine (Fig. 7).
NOTE: It's recommended to bleed the air in the high-
pressure hose every time before starting the spray washer.
Follow the instructions in Maintenance section to bleed
the air.
5. To shut down the unit, push the OFF(O) side of the On/O
switch (Fig. 7), and remove the battery or disconnect the
car kit power adapter.
Fig. 5
Fig. 6
Battery
Fig. 7
On/O
switch
On
O
Loading ...
Loading ...
Loading ...