Loading ...
Loading ...
Loading ...
Page 4 • JL Audio, Inc., 2019 Continued on Next Page
STEP 8
Connect speaker cable to the terminal cup on
the back of the enclosure, and lower the
enclosure back into position. Reinstall the two
factory inner seat bracket bolts, and fully
tighten.
Route the speaker cable as necessary.
STEP 7
While holding the Bracket in its position,
carefully lift the enclosure, then fully tighten
the four 3/8 - 16 x 1-1/4” Hex Head Bolts.
STEP 6
Place the Stealthbox® into the vehicle. Center
the enclosure, and align the two upper slots in
the Bracket with the factory inner seat bracket
bolt holes.
STEP 5
Place the enclosure on a flat surface with the
woofers facing upward. Align the four slots in
the Bracket with the threaded inserts on the
back of the enclosure, as shown.
Slide a 3/8” Split Lock Washer and a 3/8” Flat
Washer over each of two 3/8 - 16 x 1-1/4” Hex
Head Bolts, pass an assembly through each of
slots in the Bracket, into the threaded inserts,
and hand tighten.
STEP 4
Using an E12 socket and wrench, remove the
two inner seat bracket bolts.
STEP 3
Locate the two inner seat bracket bolts.
STEP 2
Fold the seat bottoms up.
STEP 1
Empty the rear seat area.
SB-D-5GRAMCCF/12TW3 INSTR_SKU# 011530
Loading ...