Loading ...
Loading ...
Loading ...
6
Operating the appliance
These instructions apply to several appliance variants. It is
possible that individual features are described which do not
apply to your appliance.
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Control panel
Setting the fan
Switching on
Press the
#, 29, 38 or ˜ button.
Switching off
Press the
# button.
Note: If fan level 2 or 3 is switched on, press the
# button
twice.
Intensive setting
You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
Press the
˜ button.
Intensive mode is activated.
Notes
■ The intensive mode run time is limited to 6 minutes.
■ Once 6 minutes has elapsed, the appliance switches back to
the fan level that was previously selected.
■ Intensive mode can be activated when the appliance is
switched off; once 6 minutes has elapsed, the appliance
switches itself off again.
Fan run-on
With the fan run-on, the appliance continues to run at the level
that was previously set and switches off automatically after
30 minutes.
1. Set the fan level.
2. Press and hold the 29 button.
Fan run-on mode is activated. The button for this level flashes
green.
Interval ventilation
With interval ventilation, the ventilation system switches on
automatically at the lowest level for 10 minutes every hour. The
interval ventilation switches off after 24 hours.
Switching on
Press and hold the 3
8 button.
The interval ventilation is activated. The
# button flashes.
Switching off
Press and hold the 3
8 button or press the # button.
Lighting
The lighting can be switched on and off independently of the
ventilation system.
Press the
6 button.
The lighting is switched on.
Setting the brightness
Press and hold the
6 button until the desired brightness is
reached.
Saturation indicator
If F is lit, this means that the integrated filters are saturated:
Lit permanently: clean the metal grease filter
For instructions on how to clean metal grease filters, refer to the
section Cleaning and maintenance.
Resetting the saturation indicator
1. Switch off the appliance.
2. Press and hold the # button for 3 seconds.
The saturation indicator is reset. F goes out.
Explanation
6
Light on/off
#
Fan off/fan level 1
2
9
Fan level 2/fan run-on
3
8
Fan level 3/interval ventilation
˜
Intensive mode
F Saturation indicator
)
Loading ...
Loading ...
Loading ...