Loading ...
Loading ...
Loading ...
12
Shoulder Support Strap
Fitting + Adjusting
1. Clip the shoulder support strap to the strap hook on the
top of the blower, as shown (Fig. 7).
2. To adjust the length of the strap, push it from one end to
form a loop above, and let out as needed, then pull the
strap from the other side to tighten (Figs. 8 – 9).
3. With machine on operator's right hand side, place
shoulder strap across chest and over left shoulder.
Operation
Front Handle Adjustment
1. Press the angle adjustment buttons on both sides, and
turn the front handle to a comfortable place (Fig. 10).
2. Release the angle adjustment buttons and the front handle
will reset to lock into position automatically.
Starting + Stopping
mWARNING! Before switching on the tool, ensure that it
is not in contact with any object.
1. Insert both batteries into the battery compartments
(Fig. 11).
2. To start the unit, slide the speed selector + switch forward
(Fig. 12).
R
R
Fig. 7
Shoulder strap
Shoulder strap
hook
Fig. 8
Fig. 9
Fig. 10
Angle adjustment
button
Front handle
Fig. 11
Battery
packs
Fig. 12
Speed selector
+ switch
ON
OFF
Loading ...
Loading ...
Loading ...