Loading ...
Loading ...
Loading ...
10
WATER QUALITY METER
The meter is primarily used to indicate ZeroWater® filter
replacement at 006. It may also be used as a simple method
to compare water quality by displaying the Total of the
Dissolved Solids (TDS) in parts per million only. The meter
should not be used to assess the safety or purity of water,
which should only be undertaken by a qualified laboratory.
For a more scientific explanation, it is showing you the
total number of detectable dissolved solids in water. With
the push of a button, the electrodes in the bottom of the
tester measure the amount of ions in the water and convert
that amount to a number that displays on the screen. The
number represents the amounts of detectable dissolved
solids in parts per million that exist in your water sample.
METER INSTRUCTIONS
FOR WATER QUALITY METER:
Remove cap, turn on, submerge
in water, change filter when it
reads 006 or higher.
REPLACEMENT BATTERY
INSTRUCTIONS: Meter includes
(2) LR44 alkaline batteries. Slide off
the battery compartment section.
Align positive ends of the new
replacement batteries pointed to
the left. Do not mix old and new
batteries. Do not milk alkaline,
standard or rechargeable batteries.
The TDS meter supplied is intended to detect and measure TDS (total
dissolved solids) in PPM. Test your water regularly.
WATER QUALITY
METER
BATTERY
COMPARTMENT
HOLD
BUTTON
(OPTIONAL)
MAXIMUM
IMMERSION
LEVEL
ON/OFF
Loading ...
Loading ...
Loading ...