Loading ...
Loading ...
Loading ...
4
T252-S & T2652-S Component Wiring
1. Use illustration for proper connection.
2. Be sure to maintain speaker polarity.
Axis ON-OFF Switch
1. Set to ON or OFF to match position of tweeter rela-
tive to listener. Default OFF position satisfies most
installations.
dB Switch
1. 0dB matches the amplitude (no increase/no attenuation)
of the tweeter to the same level as the mid-range
(woofer).
2. +2dB increases and -2dB reduces the amplitude of
tweeter in relation to the mid-range, (ideal when match-
ing offset installation like tweeters located high in door
panels and midranges low in kick panels).
Tw e eter
(TWT)
Woofer
(WFR)
+ TWT - + TWT -+ WFR -
BI-AMP
+ WFR -
0dB -2dB -4dB
OFF ON
OFF-DEFAULT
OFF
DEFAUL
T
AXIS ON
+2dB
0dB
-2dB
+ TWT - + TWT -+ WFR - + WFR -
INPUT OUTPUT
ON
OFF
AXIS
BI-AMP
OFF ON
Crossover Cover Removal
Remove 4 Screws From
Bottom to Detatch Cover
WFR Not Used
Use TWT In
Standard Mode
Default Setting
Tw e eter
(TWT)
Wo o fer
(WFR)
+ TWT - + TWT -+ WFR - + WFR -
INPUT OUTPUT
ON
OFF
AXIS
BI-AMP
OFF ON
Bi-Amp Mode
Dedicated
Mid-Range (woofer)
Amplifier
Dedicated
Tw e eter
Amplifier
Full-Range
Amplifier
+2dB
0dB
-2dB
+ TWT - + TWT -+ WFR -
BI-AMP
OFF ON
Tw e eter Axis Switch
Tw e eter Attenuation Switch
ON
OFF
AXIS
ON
OFF
AXIS
0dB
-2dB
+2dB
Tw e eter On-Axis
Tw e eter
(TWT)
Woofer
(WFR)
Tw e eter Off-Axis
0dB
-2dB
-4dB
+ TWT - + TWT -+ WFR - + WFR -
INPUT OUTPUT
ON
OFF
AXIS
+2dB
0dB
-2dB
T252-S & T2652-S Bi-Amp Cossover Wiring
1. Use illustration for proper connection and be sure to maintain speaker polarity.
2. Remove 4 screws from crossover bottom to detatch cover.
3. When BI-AMP switched OFF for one amplifier, use only “TWT” input.
4. When BI-AMP switched ON for two dedicated amplifier, use both “TWT” and “WFR” inputs.
Loading ...
Loading ...
Loading ...