Loading ...
Loading ...
Loading ...
2. V
ENTILATION
It is essential to use a venting hose to carry
the hot moist air away from the dryer unless
the dryer is situated in a open space with a
good air flowaround it. Recirculation of the
moist air will prevent the efficient operation
of the dryer.
The hose is assembled to the machine as
shown. The hose may be fitted through a wall
or through an open door or window. The hose
is 110 mm in diameter and will extend 1.8
meters.
T h e f o l l o w i n g
guidelines should be
f o l l o w e d w h e n
installing the discharge
hose.
● Do not use two hoses joined together as
the drying performance will be reduced.
● Do not restrict the flow of air through the
hose e.g. by kinking it or fitting a smaller
diameter connector to mount to a wall
opening.
● Avoid the hose making U shaped curves
as this will restrict the flow of air and
increase the chance that water will collect
in the hose.
● Check the hose regularly to remove any
build-up of fluff or water that may have
collected in it.
1
Installation of the Discharge Hose
2
5
4
3
H max
20 inches
(50.80 cm)
The following diagrams give examples of
good and bad installations.
EN
9
Loading ...
Loading ...
Loading ...