Loading ...
Loading ...
Loading ...
6
Operation
Drum Sounds
To activate the drum sounds, press and hold the Volume – and + buttons until the
lights blink red 3 times.
Press the Volume – and + buttons at the same time again to cycle through the 3 banks
of drum sounds.
Tap Slam Jam on its top, front or sides to trigger a drum sound (the rear panel with the
port door will not trigger drum sounds). The type and volume of the sounds can vary
depending on where and how hard you tap Slam Jam (soft or hard)
Pairing or Disconnecting a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Slam Jam and it will automatically go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the lights are
slowly flashing.
3. Navigate to your Bluetooth device’s setup screen, find Slam Jam and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
4. Press and hold the Bluetooth button to disconnect a paired Bluetooth device.
5. To connect to another Bluetooth device, briefly press the Bluetooth button and
repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
Loading ...
Loading ...
Loading ...