Loading ...
GENERAL SAFETY
Thank you for purchasing the Ozeri 3x Tower Fan. This product has passed extensive
quality assurance tests for residential use. Every care has been taken to ensure that it
reaches you in perfect condition.
Warning: When using electric appliances, basic safety precautions should be followed
to reduce the risk of re, electric shock and personal injury, including (but not limited
to) the following:
Read all these instructions before attempting to operate this product and save these
instructions for future reference:
THIS FAN HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER). TO REDUCE
THE RISK OF ELECTRICAL SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED
OUTLET ONLY ONE WAY. MATCH THE WIDE BLADE OF PLUG TO THE WIDE SLOT OF THE
OUTLET. FULLY INSERT. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT ATTEMPT
TO BYPASS THIS SAFETY FEATURE.
NOTE: THIS FAN IS EQUIPPED WITH A FUSE. ALWAYS UNPLUG THE
FAN BEFORE REPLACING FUSES. IF THIS FAN LOSES POWER AND YOU
SUSPECT THE FUSE IN THE PLUG HAS BLOWN, UNPLUG THE FAN, THEN
SLIDE THE FUSE DOOR FOUND ON THE SIDE OF THE PLUG TO THE
OPEN POSITION. SLIDE THE FUSE DOOR OUTWARD UNTIL THE BLOWN
FUSE IS FULLY VISIBLE. REMOVE THE BLOWN FUSE AND SNAP THE
REPLACEMENT FUSE INTO PLACE. FULLY CLOSE THE FUSE DOOR. ONLY
REPLACE WITH A FUSE RATED AT 2.5 AMPS, 125 VOLTS.
Use this fan only as described in this manual.
Check the voltage indicated on the rating plate. This fan is designed for a 120V-60Hz
electric supply. Make certain the power source conforms to these electrical requirements.
Make sure the room where this fan will be used has a working smoke detector.
Assemble the fan completely before use.
2
Loading ...
Loading ...
Loading ...