User Manual - Page 2

For FP9. Also, The document are for others LG Electronics models: TONE-FP9A, TONE-FP9WA, TONE-FP9EA

Loading ...
16 17 18 19 20 21 22 23
24 25 26 27 28 29 30 31
The LG TONE Free (TONE-FP9A) is a lightweight wireless headset that uses
Bluetooth technology.
This product can be used as an audio accessory for devices supporting either
the A2DP or Hands-Free Bluetooth Prole.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarise yourself with the safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in minor
injury or product damage.
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is Splash proof to the IPX4 level protected against splashing
of water. (The IPX4 Splash proof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!
CAUTION
Choking Hazard: This product contains small parts that may present a
choking hazard, Keep out of reach of children.
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that foreign objects do not enter the charger’s connectors
(charging port and power plug). Failure to do so may result in re or
electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily.
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may
explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause damage
to your device.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
Risk of re or explosion if the battery is replaced by an incorrect type.
Do not store or transport at pressures lower than 11.6 kPa and at
above 15000 m altitude.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types).
Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas.
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
Do not carelessly throw away old batteries. It can cause an explosion or re.
The disposal method may vary by country and region. Dispose of it in an
appropriate manner.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Wearing earbuds for a long time may cause pain, and if humidity inside
ears continues for a long time, it may cause skin trouble.
HD Speaker
If the communication network of the device you are connecting to supports
HD Voice Calling, you can enjoy making voice calls and listening to music in
high denition.
Battery Status Indicator
Status Description
Bluetooth Search Mode The battery status indicator ashes in blue.
Battery below 20%
The battery status indicator turns on and
off in red.
Battery 20% - 80%
The battery status indicator turns on and
off in yellow.
Battery 80% or more
The battery status indicator turns on and
off in green.
When there is a
problem while charging
The battery status indicator ashes in red.
Charging
(charger connected)
The battery status indicator turns on in red.
Charging complete
(charger connected)
The battery status indicator turns on in green.
Out of Range
If the device connected to the product is out of effective communication
range, the communication signal becomes weak and the communication is
lost. The effective communication range may vary depending on surrounding
and other conditions.
If the device comes back within effective communication range, the product
automatically reconnects to the device. If the device is not automatically
reconnected, touch the left or right earbud once to connect them.
LG TONE Free
If you install the “LG TONE Free” app, you can use Check Earbud Battery,
Voice Alert, Change Equalizer Mode, Check Last Connected Location Information,
and Find My Earbuds functions. Check out the app for more details.
To install the “LG TONE Free” app, search LG TONE Free in the Google Play
Store or App Store or scan the QR code below.
It supports Android 7.0 or higher and iOS 11 or higher.
Google Play App Store
Troubleshooting
If you see any of the following symptoms while using the product, make sure
to recheck it. It may not be a malfunction.
Symptom Cause and Solution
The power does not
turn on
Check the battery level and charge it.
If unable to make a
call with earbuds
If the mobile phone does not support headset
and hands-free functions, you cannot use the
calling features.
Check the battery level and charge it.
If unable to register
earbuds to mobile
phone
Check whether earbuds are turned on.
Check if the earbuds have entered the search mode.
- While the earbuds are inserted in the charging
case, press and hold the touch pad on the left
or right earbud for 3 to 5 seconds to switch to
the search mode.
If you replaced the
earbuds or there is
a problem with the
operation
(Factory reset)
While the earbuds are inserted in the charging
case, press and hold the touch pad on the left or
right earbud for 10 seconds or more.
- The battery status indicator of the charging
case ashes red and the initialization to the
factory status is carried out. After initialization
to the factory status, reconnect the earbuds.
*Factory reset and Search mode cannot be used in Plug and Wireless mode.
Specications and Features
Item Comments
Bluetooth
Specications
V 5.2 (Headset/Hands-Free/A2DP/AVRCP)
Battery
Earbud : 3.7 V / 68 mAh, Lithium-ion
Charging case : 3.7 V / 390 mAh, Lithium-ion
Music Play Time
Earbuds & With
Charging case
ANC Off : Up to 10 & Up to 24 hours*
ANC On : Up to 6 & Up to 15 hours*
Charging Time
Earbud : within an hour / Charging case : within 2 hours
Fast Charging : 5 min charge for up to 60 min playtime*
When charging wired at room temperature
Rated Input
Voltage
Earbud : 5 V 0 136 mA
Charging case : 5 V 0 500 mA
Operating
Temperature
0 °C ~ +40 °C
Operating
Humidity
5 % ~ 60 %
Dimensions
(mm) /
Weight (g)
Earbud : 21.2 mm (W) X 28.3 mm (L) X 23.2 mm (H)
/ 5.2 g (One earbud)
Charging case : 54.5 mm (W) X 54.5 mm (L) X 30 mm (H)
/ 36.7 g
Frequency range 2402 MHz to 2480 MHz
*Duration of use may vary depending on the connected mobile device,
features being used, settings, signal strength, operating temperature,
frequency band, and other methods of use.
Declaration of Conrmation
FCC NOTICE TO USERS:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modications not expressly approved by the manufacturer (or
party responsible) for compliance could void the user’s authority to operate
the equipment.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna
or the device could result in the device exceeding the RF exposure
requirements and void user’s authority to operate the device.
DECLARATION OF CONFORMITY:
Hereby, LG Electronics declares that the radio equipment type this headset is
in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at http://www.lg.com/global/support/cedoc/cedoc#
Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.
Android, Google Play, the Google Play logo, and other related marks and
logos are trademarks of Google LLC.
Apple iOS and App Store is a trademark of Apple Inc.
FCC ID: ZNFTONEFP9 (Earbud) /
ZNFTONEFP9C (Charging case)
Additional Information
1. Radio frequency exposure
This Bluetooth LG Stereo Headset is a radio transmitter and receiver.
When
in operation, it communicates with a Bluetooth equipped mobile device
by receiving and transmitting radio frequency (RF) electromagnetic elds
(microwaves) in the frequency range 2402 to 2480 MHz.
Your Bluetooth headset is designed to operate in compliance with the RF
exposure guidelines and limits set by national authorities and international
health agencies when used with any compatible LG Electronics mobile phone.
2.
Bluetooth
Connection Precautions
The following environments affect the range and reception of Bluetooth signals:
- When walls, metal, human bodies, or other obstacles exist between the
Bluetooth device and the connected device.
- When equipment that uses 2.4 GHz frequency signals (Wireless LANs,
wireless phones, microwave ovens, etc.) is placed near the devices being used.
- When using a Bluetooth device (TV, laptop, etc.) other than the mobile
phone, the sound quality may be affected by the specications and
performance of the device.
3. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially
explosive atmosphere. It is rare, but your electronic device could generate
sparks. Sparks in such areas could cause an explosion or re resulting in
bodily injury or even death. Areas with a potentially explosive atmosphere
are often, but not always, clearly marked.
4. Battery information
A rechargeable battery has a long service life if treated properly. A new
battery or one that has not been used for a long period of time could have
reduced capacity the rst few times it is used. Do not expose the battery to
extreme temperatures, never above +50°C or below -10°C. For maximum
battery capacity, use the battery in room temperature. If the battery is used
in low temperatures, the battery capacity will be reduced. The battery can
only be charged in temperatures between 0°C and +45°C.
5. Recycling the battery in your
Bluetooth
Headset
The battery in your Bluetooth Headset must be disposed of properly and
should never be placed in municipal waste.
Important Safety Information
Avoiding hearing damage
Permanent hearing loss may occur if you use your headset at a high volume.
Set the volume to a safe level. You can adapt over time to a higher volume
of sound that may sound normal but can be damaging to your hearing.
If you experience ringing in your ears or mufed speech, stop listening and
have your hearing checked. The louder the volume, the less time is required
before your hearing could be affected. Hearing experts suggest that to
protect your hearing:
• Limit the amount of time you use Headset at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking
near you.
Please refer to your handset user guide for more information on how to
adjust listening levels on your handset.
Using headsets safely
Use of Headset to listen to music while operating a vehicle is not
recommended and is illegal in some states and countries. Be careful and
attentive while driving. Stop using this device if you nd it disruptive or
distracting and do not use this device while operating any type of vehicle or
performing any other activity that requires your full attention.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses,
that is contained in this product, please visit https://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers
and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a
charge covering the cost of performing such distribution (such as the cost of
media, shipping, and handling) upon email request to opensour[email protected].
This offer is valid for a period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of this information.
RISK GROUP 2
CAUTION : UV EMITTED FROM THIS PRODUCT.
EYE OR SKIN IRRITATION MAY RESULT FROM EXPOSURE.
USE APPROPRIATE SHIELDING.
WARNING : IF YOU DON’T DO CHARGING OR IF
YOU OPEN THE CHARGING CASE, THE UVNANO
FUNCTION IS NOT ACTIVATED.
Symbols
~
Refers to alternating current (AC).
0
Refers to direct current (DC).
Refers to class II equipment.
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
The output level shall automatically return to an output level not exceeding
RS1 when the power is switched off.