Loading ...
Phonebook
Add record
1 Press [Menu].
2 Select [Phonebook] > [Add new].
3 Follow on-screen instructions.
Call from the phonebook
1 Press .
2 Select a record and press .
3 Follow on-screen instructions.
Direct access memory
You have up to 2 direct access memories (keys 1
and 2). To dial the saved phone number
automatically, press and hold on the keys in
standby mode.
Depending on your country, keys 1 and 2 are
preset to the voice mail number and information
service number of your service provider
respectively (network dependent).
Call log
Call from the call log
1 Press .
2 Select a record and press .
View record
Press > [Option] > [View].
Save record
1 Press > [Option] > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press > [Option] > [Delete].
2 Follow on-screen instructions.
Redial
Call from the redial list
1 Press [Bis].
2 Select a record and press .
Save record
1 Press [Bis] > [Option] > [Save number].
2 Follow on-screen instructions.
Delete record
1 Press [Bis] > [Option] > [Delete].
2 Follow on-screen instructions.
Record an announcement
(for D475 only)
1 Press [Menu] > [Answering machine] >
[Announcement].
2 Follow on-screen instructions.
How to use
Register additional handsets
You can register additional handsets to the base
station.
1 Press [Menu].
2 Select [Services] > [Register], then press [OK]
to conrm.
3 Press and hold on the base station for
5 seconds.
4 Enter the system PIN/Passcode (0000).
5 Press [OK] to conrm PIN/Passcode.
Registration is complete in less than
2 minutes.
Restore default settings
You can reset your phone settings to the original
factory settings.
1 Press [Menu].
2 Select [Services] > [Reset], then press [OK] to
conrm.
3 Follow on-screen instructions.
Note
• You can recover the initial PIN/Passcode
by following this procedure.
Battery
Adapter (base and charger)
Philips: 2 x AAA NiMH 1.2 V Rechargeable 550
mAh batteries. Use only the supplied batteries.
Phonebook: 50 entries
Call log: 50 entries
Talk time: 16 hours
Standby time: 250 hours
DECT technology
Frequency band: 1881.792-1897.344MHz
Max. power: 22.8 dBm
Modulation Mode: GFSK
Antenna Type: dipole
Antenna Gain: 0dBi
Operating temperature range of
tested equipment: -10°C to 40°C
Meic:
MN0063-E060040
Input:
Output:
HuaJin:
HJ-0600400P1-EU
6VdC 400 mA 6VdC 400 mA
Technical
specications
100-240 V
~
,
50/60 Hz 200 mA
100-240 V
~
,
50/60 Hz 150 mA
Note
• You can install a DSL (digital subscriber
line) lter to prevent noise and caller ID
problems caused by the DSL interference.
• You can nd the Declaration of Conformity
on www.p4c.philips.com.
To access the user instructions online, use the
reference model number written on the product
label at the bottom of the base station.
1. Use the earphones with care, they can produce an
excessive sound pressure, a headphone can
cause hearing loss.
2. Replacing the battery by an incorrect type creates
a risk of explosion. Dispose of used batteries
according to the instructions.
3. The adapter shall be installed near the equipment
and shall be easily accessible.
4. The device complies with RF specications when
it is used at a distance of 0 mm from your limbs.
5. To avoid the risk of hearing loss, do not listen at
high volumes for long periods of time.
Information on the safety of users and non-users:
Compliance with specic usage restrictions on certain places
(hospitals, planes, petrol stations, schools...). Precautions to be
taken by electronic implants wearers (cardiac stimulators, insulin
pumps, neurostimulators...), concerning in particular the
distance between the radio equipment and the implant
(15 centimeters in the case of the strongest sources of exposure
such as mobile phones).
Information on the behaviors to follow to reduce exposure to
radiation emitted by equipment:
Use your device in good reception conditions to reduce the
amount of radiation received. Make reasoned use of radio
equipment, such as mobile phones by children and teens, for
example by avoiding night-time communications and limiting
the frequency and duration of calls. Keep radio equipment away
from the womb of pregnant women. Keep radio equipment
away from teenagers’ lower abdomens.
MMD Hong Kong Holding Limited
1006-07, C-Bons International Center, 108 Wai Yip Street, Kwun
Tong, Kowloon,Hong Kong
TP Vision Europe BV
Prins Bernhardplein 200, 1097 JB Amsterdam The Netherlands
2019 © MMD Hong Kong Holding
Limited. All rights reserved.
This symbol on a product indicates that
the device is compliant with the
European Directive 2012/19/EU.
This product has been manufactured
by and is sold under the responsibility
of MMD Hong Kong Holding Limited.
MMD Hong Kong Holding Limited is
the warrantor in relation to this product.
Philips and the Philips Shield Emblem
are registered trademarks of Koninklijke
Philips N.V. and are used under license
from Koninklijke Philips N.V.
UMS_D470/475
FR_V1.0
Silent mode
You can enable the silent mode for a specied
duration.
[Settings] > [Sounds] > [Silent mode]
Sound prole
Allows you to customize the sound of voices to
your liking.
[Settings] > [Sounds] > [Sound prole]
Eco/ECO+ mode
Reduces transmission power and radiation
(2 seconds of ring delay, 50% less standby
time).
[Settings] > [Eco mode]/[ECO+ mode]
Call barring
Avoid unwanted outgoing calls to selected
numbers.
[Services] > [Call barring]
Blacklist
Blocks incoming calls from certain numbers.
[Services] > [Blacklist]
Learn More
No signal bar is displayed on the screen.
• The handset is out of range. Move it closer to the
base station.
• If the handset displays [Regist. your handset],
register your handset. (See the section on
“Register additional handsets”).
If I fail to pair (register) the additional handsets to
the base station, what do I do?
Your base memory is full. Access > [Services] >
[Unregister] to unregister the unused handsets
and try again.
I have chosen a wrong language which I cannot
read, what do I do?
1 Press to go back to the standby screen.
2 Press to access the main menu screen.
3 The following options will appear on the screen:
4 Select them to access the language options.
5 Select your own language.
My handset is in searching or unavailable status,
what do I do?
• Make sure that the base station has power supply.
• Register the handset to the base station.
• Move the handset closer to the base station.
I cannot change the settings of my voice mail.
What do I do?
The voice mail service is managed by your service
provider but not the phone itself. Contact your
service provider to change the settings.
No display
• Make sure the batteries are charged.
• Make sure there are power and phone
connections.
The handset on the charger does not charge.
• Make sure the batteries are inserted correctly.
• Make sure the handset is placed properly on the
charger. The battery icon animates when charging.
• Make sure the docking tone setting is turned on.
When the handset is placed correctly on the
charger, you can hear a docking tone.
• The charging contacts are dirty. Disconnect the
power supply rst and clean the contacts with a
damp cloth.
• Batteries are defective. Purchase new ones with
the same specications.
Bad audio (crackles, echo, etc.)
• The handset is almost out of range. Move it
closer to the base station.
• The phone receives interference from the nearby
electrical appliances. Move the base station away.
• The walls are too thick. Move the base station
away.
The handset does not ring.
Make sure the handset ringtone is turned on.
The caller ID does not display.
• The service is not activated. Check with your
service provider.
• The caller’s information is withheld or unavailable.
Frequently
Asked Question
[Phone setup] > [Language]
[Réglages] > [Langue]
[Telefon-Setup] > [Sprache]
[Cong. telef.] > [Lingua]
[Tlfn ayarları] > [Dil]