Loading ...
Loading ...
Loading ...
8
Insert the unit with the seal into the sleeve pushing it all the way to the rear, making sure the seals are against the
rear grille. The seals are necessary to reduce recirculation of hot air into the intakes which would reduce system
performance.
An option is to purchase 3/4'' diamond cut aluminum grille and cut it to fit inside the sleeve. Secure it with screws.
Attach the dual intake grill directly to the back of the unit. Slide the entire unit into the sleeve and seal with the
stuffing seal supplied with the kit.
Trim Kit Installation Instructions
1. Install the 1''x1''x84'' long stuffer seal between the wall sleeve and the unit. A flat-bladed screwdriver or putty
knife is needed.
2. Assemble the trim frame by inserting the top and bottom pieces into side pieces and snapping into place.
3. Pull the cord through the trim frame and slide the trim over the unit until flush with the wall.
Energy saving suggestion: In order to reach the maximum energy saving and comfortability, it is necessary to
use an appropriately sized cover to provide additional insulation and air sealing when the unit is not in use
during the off-using-season.
Loading ...
Loading ...
Loading ...