Loading ...
Loading ...
Loading ...
Changing Engine Oil & Filter
Changing the oil and filter requires special
tools. We recommend that you have your
motorcycle serviced by your dealer.
Use a new Honda Genuine oil filter or
equivalent specified for your model.
NOTICE
Using the wrong oil filter can result in serious
damage to the engine.
1.
If the engine is cold, idle the engine for 3
to 5 minutes.
2.
Turn the ignition switch to the OFF
position and wait for 2 to 3 minutes.
3.
Place your motorcycle on a firm, level
surface.
4.
Place a drain pan under the drain bolt.
5.
Remove the oil fill cap, drain bolt, and
sealing washer to drain the oil.
6.
Remove the oil filter cover, oil filter, spring
and gasket by removing the oil filter cover
bolts.
u Discard the oil and oil filter at an
approved recycling center.
20181206141630_31KZZA600_enu_BOOK Page 68 Thursday, December 06 2018 14:23:26 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
65
Continued
Sealing washer
Drain bolt
Loading ...
Loading ...
Loading ...