Loading ...
Loading ...
Loading ...
11
49-60782
ENGLISH
INSTALLATION INSTRUCTIONS
DOOR ALIGNMENT
Freezer Door
1. Remove hinge cover screw. (Fig 1.)
2. Remove the top hinge cover.
3. Loosen the top hinge screws using a
Phillips head screwdriver.
4. Adjust the door or put a spacer in
between and then tighten the screws.
5. Replace the top hinge cover.
Hinge
Cover
Fig. 1
Top
Hinge
REVERSE DOOR SWING
Left/right door opening method:
This product allows you to reverse the
door opening from left to right and back.
You can select your preference of door
opening by following the procedure to
make the change.
Dismantling: (See Figs. 1 &2)
1. Affix refrigerator and freezer door by
sticking adhesive tape on both sides
to hold doors in place.
2. As shown in Fig. 1, dismantle the hinge
cover on the upper part of freezer door
with a Phillips head screwdriver. Then
remove the three screws that hold the
hinge. Take out the hinge by pulling it
vertically, and keep it in a safe place.
3. Remove the adhesive tape on freezer
door, lift it and take off the door, and
carefully put it aside.
4. Dismantle two screws of the central
hinge, lift it and take off the central
hinge, and keep them in a safe place.
(See Fig. 2)
5. Remove the adhesive tape on
refrigerator door, lift it and take
refrigerator door, and carefully put it
aside.
6. Remove the doorstoppers from the
refrigerator and freezer doors.
7. Insert left side doorstopper (provided
in your packing) on the left side
bottom hole of the refrigerator door
and on the left side bottom hole of
the freezer door. Fasten with screws
provided.
WARNING
Follow all steps
when reversing the door swing.
Failure to follow these instructions,
leaving off parts, or overtightening
screws, can lead to the door falling
off and result in injury and property
damage.
Fig. 2
Screw
Holes
Doorstopper
(right side)
Middle Pivot
Pin
Central Hinge
Loading ...
Loading ...
Loading ...