Greenworks 01-0002501907UA Battery-Powered Lawnmower G40LM35K (Li-Ion 40V 35cm Cutting Width Up to 200m² Mowing Area, 2-in-1 Mulching and Mowing, 5-Fold Cutting Height Adjustment with 2 Ah Battery and Charger)

User Manual - Page 4

For 01-0002501907UA.

PDF File Manual, 164 pages, Read Online | Download pdf file

01-0002501907UA photo
Loading ...
Loading ...
Loading ...
1 DESCRIPTION
1.1 PURPOSE
This machine is used for domestic lawn mowing. The cutting
blade must be approximately parallel to the ground. All four
wheels must touch the ground while you mow.
1.2 OVERVIEW
Figure 1-9.
1
Quick-release lever
2
Lower handle
3
Upper handle
4
Knob
5
Bolt
6
Grass catcher
7
Rear discharge door
8
Mulch plug
9
Height adjustment lever
10
Battery door
11
Battery pack
12
Safety key
13
Start button
14
Handle switch
15
Front wheel
16
Rear wheel
17
Slot
18
Mounting nut
19
Spacer
20
Blade
2 SAFETY
WARNING
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
3 INSTALLATION
WARNING
Do not change or make accessories that are not
recommended by the manufacturer.
WARNING
Do not put in the safety key or the battery pack until you
assemble all the parts.
3.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine before
use.
WARNING
If the parts are damaged, do not use the machine.
If you do not have all the parts, do not operate the
machine.
If the parts are damaged or missing, speak to the service
center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local
regulations.
3.2 UNFOLD AND ADJUST THE
LOWER HANDLE
Figure 2.
1. Pull up and back the upper handle to lift the handle into
operation position. Make sure that the handles click into
position correctly.
2. Tighten the lower handle with the quick-release levers on
the two sides.
NOTE
Make sure that the two handles are in the same position.
WARNING
Do not make damage to the cables when you fold or unfold
the handle.
3.3 INSTALL THE UPPER HANDLE
Figure 3.
1. Align the holes in the upper handle and the lower handle.
2. Put the bolts through the holes.
3. Tighten the knobs onto the bolts.
4. Do the same operation on the other side.
3.4 INSTALL THE GRASS CATCHER
Figure 4.
1. Remove the mulch plug.
2. Open the rear discharge door and hold it.
3. Hold the the grass catcher by its handle and put the hooks
over the slots.
4
English
EN
Loading ...
Loading ...
Loading ...