Loading ...
Loading ...
Loading ...
60
Press this button for about 2 seconds to
switch on or switch off the dryer.
This button allows you to select the desired
drying program (the corresponding indicator
light will light up).
To start the selected cycle with the preset
drying level, press START/PAUSE.
Moreover, if you want to modify the
chosen programme, select the desired
drying level by pressing the relevant
button and then press START/PAUSE
button to start the cycle.
PROGRAMME DURATION
When a programme is selected the
appliance calculates the time to the end
of the selected programme based upon a
standard loading but, during the cycle, the
appliance corrects the time to the
humidity level of the load.
PROGRAMME END
The "END" indicator light will blink at the
end of the programme, it is now possible
to open the door.
At the end of the cycle, turn off the
appliance by pressing the
ON/OFF
button.
PAUSING THE MACHINE
Press the START/PAUSE button to
pause the machine (the corresponding
indicator light will flash).
Press the START/PAUSE button again to
re-start the programme from the point it
had been paused at.
CANCELLING THE SET PROGRAMME
To cancel the programme, press the
ON/OFF button for about 2 seconds.
If there is a break in the power supply
whilst the machine is operating, when
the power is restored, by pressing the
START/PAUSE button, the machine will
restart from the beginning of the phase it
was in when the power was lost.
This button allows to set the desired
dryness level editable option up to 3
minutes after the starting of the cycle:
Dry Hanger: to get garment ready to
be hang.
Dry wardrobe: for laundry that can be
directly stored.
Extra-dry: to get completely dry
garments, ideal for full load.
This appliance is equipped with Drying
Manager function. On automatic cycles,
each level of intermediate drying, prior to
the reaching the selected one, is
indicated by flashing the light indicator
corresponding to the degree of drying
reached.
In case of incompatibility, all indicator
lights flash quickly for 3 times.
DRYING SELECTION button
If the drying level is not compatible
with the selected programme or
none
of the drying levels are provided, the
three corresponding i
ndicator lights
will flash.
Close the porthole BEFORE pressing
the START/PAUSE button.
START/PAUSE button
PROGRAMME SELECTION button
ON/OFF
button
WARNING
Don’t touch the buttons while inserting
the plug because the machines
calibrates
the systems during the first
seconds: touching the buttons, the
machine couldn’t work property. In
this case, remove the plug and repeat
the operation.
Loading ...
Loading ...
Loading ...