Loading ...
Loading ...
Loading ...
5
OPERATION
CONTROL PANEL
The control panel is located inside the right door on the front panel.
Main Power
Switches
Make sure the POWER switch is OFF. Plug
the power cord into a 110-120 VOLT 15 AMP
grounded outlet only. For flame effect only,
Slide ON / OFF switch to the ON position.
Indicator light will come on.
For low heat, ON / OFF switch and I switch
must be on. Indicator light will come on.
For high heat, ON / OFF switch, I and II
switches must be on. Indicator light will
come on
Set the temperature knob to your desired
heat setting by turning it clockwise for
warmer air or counterclockwise for cooler
air.
Flame
Adjustment
To adjust the flame effect, turn the dimmer
dial clockwise or counter clockwise to get
the desired flame intensity. The function will
only operate when the main power switch is
in the “ON” position.
Temperature
Control
The heat output is controlled by the
thermostat control dial. Set the thermostat
control dial by turning it all the way
clockwise initially. When the room reaches
the desired temperature, reduce the setting
by slowly turning the thermostat dial
counter clockwise until the heater clicks and
turns off. The heater will then maintain the
room temperature at the desired level.
Loading ...
Loading ...
Loading ...