TROUBLESHOOTING
PAIRING ISSUES?
ISSUE: The biggest challenge with true wireless earbuds is ensuring your buds are
properly connected to each other and your device. There are times when you may
unintentionally disconnect the buds and change their paired state, this can create
pairing challenges and impact your ability to use either bud solo (Solo Mode). Do not
worry, as there is an easy fix!
SOLUTION:
To ensure ease of re-pairing, please unpair or forget your Vinyl in your paired Bluetooth
device list
Remove the Vinyl earbuds from the charging case and manually power OFF by pressing the
button on BOTH earbuds for 4 seconds
Once both buds have been powered OFF, reset them:
1. Press the button on each bud for 10 seconds to completely reset them (this will power cycle
them on and off again).
Sync the buds together:
1. Place the buds back in the case until both LEDs show red, and then pull them back out.
2. Both buds will automatically power ON and the LEDs will simultaneously flash BLUE while
they sync to each other.
3. You will hear a tone to indicate the sync was successful, and the right OR the left bud will
begin to flash RED/BLUE.
At this time, turn on your device’s Bluetooth and look for Vinyl in your list of available
Bluetooth devices. Please make sure it only appears once, and select it.
1. IMPORTANT – Select all “Pair” and “Ok” prompts that will pop up on your screen.
2. Once successfully paired, a voice prompt will notify you that you are now “Connected” and
you will see Vinyl twice in your “paired devices” list.
USE EITHER BUD SOLO:
ISSUE: If you’re a user that would like to use the Vinyl with only one earbud, you’re
in luck! The technology in Vinyl allows the user to use either the left OR the right bud
in Solo Mode. Once paired correctly, you will be able to switch between buds at your
discretion. Although, if you’re having any challenges using either bud solo, you may
Loading ...
Loading ...
Loading ...
