Bose T4S TONEMATCH MIXER

User Manual - Page 43

For T4S TONEMATCH MIXER.

PDF File Manual, 48 pages, Read Online | Download pdf file

T4S TONEMATCH MIXER photo
Loading ...
Loading ...
Loading ...
English - 43
Care and Maintenance
Troubleshooting
If you experience problems while using this product, try the following solutions. If you still cannot solve the
problem, seek online help at www.Bose.com/livesound. If you cannot find answers to your questions there,
please call the Bose Product and Technical Support Team directly at (877) 335-2673.
Problem What to do
T4S/T8S is plugged
in, power switch is on,
but no power.
Make sure you have power at the AC outlet. Try operating a lamp or other
equipment from the same AC outlet or test the outlet using an AC outlet tester.
If using the T4S with an L1® Model II or 1S system:
Make sure the ToneMatch® cable is properly connected to the mixer and the L1
power stand.
Verify that the power cord plug is fully inserted into the power stand and the AC
(mains) outlet.
Make sure the L1 power stand is turned on and the power LED is blue.
T4S/T8S is on, but
there is no sound.
Make sure the Master volume control is turned up.
Verify that the input channel(s) you want to hear is not muted.
Check that the Volume control is turned up for the channel you want to hear.
Make sure the appropriate input channel Trim control has been turned up enough
so that the LED is green (indicating that there is a strong input signal).
Check the Prefs (Preference) Input and Output level meters to confirm that there
is a signal at both the input and output stages.
Make sure volume control is turned up on your input source (instrument).
Connect your input source (instrument) to the mixer using a dierent cable.
Plug your input source (instrument) directly into the L1 power stand or a dierent
amplifier to make sure the source is working.
Turn the mixer o and wait 30 seconds. Then turn mixer on again.
If using the T4S with an L1 Model II or 1S system:
Turn o the power stand, re-seat the ToneMatch cable plug in the ToneMatch
port, and turn on the power stand again.
If available, try a dierent ToneMatch cable. If another ToneMatch cable is not
available, try a standard ethernet cable.
Connect the T4S/T8S Master output to the Analog Input on the power stand
using a ¼" phone plug cable. Turn up the power stand Trim control, and verify
that you hear sound.
Make sure power LED on power stand is blue. If LED is red, please call the Bose
Product and Technical Support Team directly at (877) 335-2673.
Loading ...
Loading ...
Loading ...