Loading ...
Loading ...
Loading ...
6
Questions? We’re here to help!
Visit: www.maxi-matic.com for support on this product.
HOW TO USE
1. Open the lid by pulling the lid up. Fill the kettle with water.
Do not overll. Be sure not to exceed the MAX line. To
close the lid, push down until it snaps into place. Always
place the 360° swivel base on a at, level surface.
2. Place the kettle onto the 360° swivel base. Check if the
voltage at your location is the same as that of the kettle.
Details can be found on the label of the kettle base.
Using the Kettle for Boiling
Using the Adjustable Temperature Knob
• Turn the Adjustable Temperature Knob clockwise from 0°F
to 190°F to keep water at desired temperatures. The Heat
indicator will illuminate when warming. When desired
temperature is reached, the Heat indicator will turn off and
the Power/Ready indicator will illuminate.
NOTE: The adjustable temperature knob and the power
switch work independent of each other. When using
the adjustable temperature knob, the water will heat
to desired temperature without boiling. The kettle and
indicator lights will cycle on and off to maintain the
desired temperature. To stop the heating cycle, turn the
adjustable temperature knob to 0°F.
3. After boiling, disconnect the kettle from the electric
supply.
BEFORE FIRST USE (cont.)
1. Use only cold water when lling the device.
2. Use only ltered water to reduce lime scale buildup.
3. The water level must be between the MAX. and MIN. marks.
4. Switch the kettle off before removing it from the 360°
swivel base.
5. Always use lid when operating or water may not warm or
boil to set temperature. Be certain lid is closed tightly.
6. The swivel base and exterior of the kettle must never
become wet.
7. Kettle body used must match the 360° swivel base.
-
CAUTION:
Take caution when
opening the lid, the
water is very hot. Wait
a few minutes for
condensation to
evaporate. After
boiling water, the
outside of the kettle
can be very hot. Only
grasp by the handle.
Do not try to lift kettle
body with both hands.
-Do not open the lid
when pouring. If the
kettle is overlled,
boiling water may be
ejected. The kettle is
only to be used with
the base provided.
• To boil water at 212°F, press the Power Switch located
below the handle on the kettle.
• When the water is boiled, the power switch will pop up
automatically, the Heat indicator will turn off and the
Power/Ready indicator will illuminate. NOTE: Stop boiling
by manually turning off the Power Switch at any time.
Loading ...
Loading ...
Loading ...