Sun Joe SPX9005-PRO-RM Commercial Series Cold Water Electric Direct Drive Crank Shaft Pressure Washer 2.15 HP Brushless Induction Motor 120 Volt Wall Mount Roll Cage 1300 PSI Max* 2 GPM Max* Certified Refurbished

User Manual - Page 8

For SPX9005-PRO-RM.

PDF File Manual, 20 pages, Read Online | Download pdf file

SPX9005-PRO-RM photo
Loading ...
Loading ...
Loading ...
8
Unpacking
Carton Contents
Electric pressure washer with lower handle frame
Upper handle frame
Spray wand
Trigger gun
Oil measuring plug
Five (5) Quick-Connect nozzles (0º, 15º, 25º, 40º and Soap)
Needle clean-out tool (included with manual packet)
High-pressure hose
Manuals with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation
risk!
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
1. Slide the upper handle frame into lower handle frame,
then depress the small button at the end of the lower
handle frame, push and insert into upper handle until it
snaps securely into place (Fig. 1).
mIMPORTANT! Before starting, follow the instructions
below to remove the oil inlet nut on top of the pump and
replace with the oil measuring plug.
2. Flip up the pump cover to expose the oil inlet nut. Use a
wrench to loosen and remove the oil inlet nut by twisting it
counterclockwise (Fig. 2).
3. Insert the provided oil measuring plug and secure in place
by twisting it clockwise (Fig. 3).
Fig. 1
Upper handle
frame
Lower handle
frame
Push button
Fig. 2
Pump cover
Oil inlet
nut
Fig. 3
Oil
measuring
plug
Loading ...
Loading ...
Loading ...