Loading ...
Loading ...
Loading ...
4
Before using the Bella immersion blender for the rst time
1. Remove all packaging materials before using.
2. Wash the blending shaft and the whisk attachment in soapy water. Rinse and dry thoroughly.
CAUTION: Do not touch blades. The blending shaft attachment is very sharp.
Use extreme care when handling. Failure to do so can result in personal injury.
3. The housing may be wiped with a damp cloth.
CAUTION: Do not immerse motor housing in water or other liquids.
Operating Instructions
IMPORTANT: Blades are very sharp, handle with care. Ensure the immersion blender is unplugged
fromthepower outlet before assembling or removing attachments.
1. To assemble the detachable blending shaft to the motor housing, turn the shaft
onacounter-clockwise direction until tightened.
2. Plug the immersion blender to the power outlet.
3. Lower the immersion blender into food and press the desired speed at the top of the motor
housing.
NOTE: Maximum duration at high speed cannot exceed 1 minute.
Let the unit rest for 1 minute between two consecutive blending cycles.
NOTE: Do not run the immersion blender without any load for more than 15s.
4. When nished processing, stop the immersion blender by releasing the speed control button
atthetop ofthemotor housing.
5. To disassemble, just turn in the blending shaft on a clockwise direction
CAUTION: Make sure the level of liquid or food in the container is below the joint of the blender,
as this could cause an electric shock.
To assemble and disassemble the attachments, follow steps 1 to 4.
1 32 4
14898-14899-14900-17130-17131_BELLA_Immersion Blender_IM_r2.indd 4 8/4/20 3:58 PM
Loading ...
Loading ...
Loading ...