Loading ...
Loading ...
Loading ...
2020
cleaning & maintenance
CLEANING & MAINTENANCE
Cleaning Carafe:
To clean the Carafe, use warm soapy water
and rinse thoroughly. Use a soft foam brush
with a long handle to reach the bottom.
• The Carafe Lid is removable and is dishwasher
safe, top rack only.
External cleaning
Clean exterior of your BruHub using a damp, soapy, soft cloth.
Descaling
Scale is buildup that can occur over time after multiple uses.
Descaling should be performed every few months to keep your
BruHub working effectively and efficiently. Parts that come into
contact with water during brewing can have a calcium buildup. Also,
the heating element may have deposits that need removal.
To descale, use the Carafe, fresh water, a safe descaling solution,
and perform task near a sink.
1. Turn unit off. Unplug. Remove Water Tank from unit and empty.
2. Pour descaling solution into the Removable Water Tank. Pour
fresh water into the Water Tank. Place Water Tank back into
BruHub. Plug back in and turn on.
3. Place Carafe on the Drip Tray Base. Hit brew and use largest
amount of size and highest temperature for the cycle. When
finished, pour all liquid contents into sink.
4. Turn unit off. Remove Water Tank and rinse in sink thoroughly.
Remove any excess liquid solution on the Lid above the Water
Tank, detachable Drip Tray Base, and other areas.
5. Place Water Tank back into unit and fill with fresh water near the
Max Fill Line. Turn unit back on.
6. Run the largest brew size and highest temperature on the unit.
Run multiple brew cycles on the unit. You may need to fill Water
Tank more than once during final rinsing process.
7. Turn off appliance and unplug. If there is any descaling solution
left over in Water Tank, repeat steps above.
Water Drainage Release Valve
After multiple brews or if BruHub has not been run for some time, any
water that has backed up into unit can be released from underneath.
To release water from your unit:
1. When turned off and unplugged, hold the BruHub over a sink and
lift up unit. Locate the Water Drainage Release Valve under the
BruHub Base.
2. Turn the Release Valve counterclockwise to the unlock position
to release any water. After all water is released, dry the
underneath of the unit.
3. Turn the Release Valve clockwise to the lock position before
using your BruHub again.
Loading ...
Loading ...
Loading ...