Loading ...
Loading ...
Loading ...
6
Toasting Instructions
1. Before toasting, make sure the crumb tray is locked in position on the bottom of the Toaster and the
toasting lever is in the UP position.
2. Make sure no bread or other objects are inside the toasting slots. Place Toaster on a at, level, heat
resistant surface.
3. Plug the power cord into a 120V AC electrical outlet.
4. Remove all protective wrappings from food before placing into the toasting slot(s).
IMPORTANT: Avoid toasting torn bread slices or small pieces of toaster food that may get lodged in
toasting slot(s).
5. Insert bread or toaster food into the toasting slot(s).
6. Turn the browning control dial to the desired shade (1 – 6). To test toasting times for browning, it is best
to use both toasting slots; position the browning control dial between (3) and (4) medium; then adjust
each subsequent toasting to your preference.
7. Lower the toasting lever until locked into place. The automatic centering guides hold food upright for
uniform side-to-side toasting.
8. When the bread is lowered into position, the CANCEL button’s halo will illuminate, and toasting will
begin.
NOTE: The toasting lever will not lock into position unless the Toaster is plugged into a 120V AC electrical
outlet.
NOTE: When toasting a single slice, the bread may be placed in any toasting slot.
NOTE: To prevent a re hazard, never place bread over the opening of the Toaster; always place bread into
the slots.
NOTE: DO NOT change the browning selection during the toasting cycle. Press the halo lighted CANCEL
button; then turn the browning control dial to adjust. Lower the toasting lever and toast until the desired
toast color is achieved.
9. At the end of the toasting cycle, bread or toaster food will rise automatically. Use the high lift lever to
remove smaller toaster foods or breads such as English mufns.
10. Remove bread from toasting slot(s). Use care when removing toasted bread as both the toastace and
the top of the Toaster will still be hot.
IMPORTANT: Never use a fork or sharp-edged utensil to remove toast, because that may damage the
heating element or cause injury.
11. To interrupt toasting, press the halo lighted CANCEL button.
12. Unplug cord from wall outlet when not in use and before cleaning. Do not attempt to dislodge food
when the Toaster is plugged in.
Bagel Cycle
NOTE: Use the BAGEL cycle for English mufns, too!
1. Plug the power cord into a 120V AC electrical outlet.
2. Slice bagels or English mufns in half; insert one half in each toasting slot with the cut sides facing the
center of the toasting slots.
NOTE: Use either toasting slot when toasting only half a bagel or English mufn. Use slices that t freely
into toasting slots.
Loading ...
Loading ...
Loading ...