Loading ...
Loading ...
Loading ...
49-60777
12
REFRIGERATOR CARE
MAINTENANCE
Power Interruptions
• Occasionally there may be power interruptions due to thunderstorms
or other causes. Remove the power cord from wall outlet when a power
outage occurs. When power has been restored, replug power cord to wall
outlet. If outage is for a prolonged period, inspect and discard spoiled or
thawed food in freezer and refrigerator. Clean refrigerator before reusing.
Vacation and Moving Care
• For long vacations or absences, empty food from refrigerator and
freezer, move the temperature dial to the “OFF” position and clean the
refrigerator and door gaskets according to “General Cleaning” section.
Prop doors open, so air can circulate inside. When moving, always move
the refrigerator vertically. Do not move with the unit lying down. Possible
damage to the sealed system could occur.
Energy Saving Tips
• The refrigerator should be located in the coolest area of the room, away
from heat-producing appliances or heating ducts, and out of direct
sunlight.
• Let hot foods cool to room temperature before placing in the refrigerator.
Overloading the refrigerator forces the compressor to run longer and
thus increases energy consumption. Foods that refrigerate too slowly
may lose quality or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing in
the refrigerator.
• The shelves should not be lined with aluminum foil, wax paper, or paper
towels. Liners interfere with cold air circulation, making the refrigerator
ïèööèĦæìèñ÷
• Organize food to reduce door openings and extended searches. Remove
as many items as needed at one time, and close the door as soon as
possible.
ENGLISH
WARNING
EXPLOSION OR FIRE HAZARD
Risk of Fire or Explosion. Flammable refrigerant used. Do not puncture
refrigerant tubing. To be repaired only by trained authorized service
personnel. Consult Repair Manual before attempting to service this
product. All Safety Precautions Must be followed. Component parts
shall be replaced with like components to minimize the risk of possible
ignition due to incorrect parts or improper service.
Loading ...
Loading ...
Loading ...